Has anyone had a problem with MIP CVD's rubbing on the Traxxas aluminum steering hubs? Just installed my front and they are rubbing really bad on the top section of the hub. Thanks for any advice.
I have them in the rears and yes they did rub a bit. First tried adjusting the camber of the wheels to give more clearance but wasn't getting enough so I took the ok' Dremel to them and shaved off a little off the top and now no more binding.
I shimmed my axles away from the hubs/steering blocks just enough so they dont rub.
Sl4sh mmp2400 - savage flux hp XL - vorza flux hp
Common problem with MIPs. Either shim them or mill out the steering blocks. They do it on the plastic ones too.
Awesome ideas!!! Now I can put my strc knuckles back on.
Rally GT8 4x4 in progress.