i have new turnbuckle with steel hollow balls and new knuckle too. and tried moving wheels with servo unhooked. its deff the servo you can see the play in it when you move the wheels by hand thanks for the info on flysky they have a new one out that has a rechargeable battery. the saver seems fine. soo im thinking
this month 5085
bearings for servo savo, dont know what bearing they are. anyone have a part #
next month new flysky gt3c
and if i have enough sv2 if not
myabe driveline. but dont see a neeed. have had no issues
im trying to build up to a nue. i want something that can be reliable, thats the main goal.
and a little faster.
Last edited by ptsdisntfun; 10-12-2012 at 05:43 PM.
do the driveline last but i would of done the rpm arms first!
i havent had any issues with the stock arms. i kinda thought of having them as a weak link. instead of breaking a bulkhead. i dont ramp it some the only damage i would get would be a curb(probably worst).
also just got my speed hawgs just done. really like. keep stock gearing and think heat will be fine. have a fan on esc and heatsink on motor. it kogs a little more from a standstill.
Last edited by ptsdisntfun; 10-12-2012 at 06:00 PM.
the rpm arms are stronger and will bend without breaking and the stock arms break and won't flex if that makes sense!
ill probably get them next month. i didnt think about programing the sv2, gona bring cost higher then i can afford.
it will run without programming it .just will run better with!
***You Build It ...I'll Jump It!!!*** OS .18 TZ; Trinity Pipe; HCR Titanium Skid Plates & Bumpers; Futaba S9450 Throttle Servo; Airtronics 94358Z Steering Servo; RPM A-arms & Knuckles; FOC; Lunsford Titanium Hinge Pins,Turnbuckles, Push Rods & Rocker Posts; New Era Roll Bar & Engine Mount; Proline Mashers on Velocity Rims.
whats this phantom green servo i keep seeing glipses off
found this, would it work Savox SH-0256