Same Bearing, i have checked the exploded view for seeing if traxxas have changed the small bearing that support the transmission for bigger one because all people put a aftermarket aluminum part with big bearing in the slash and stampede 4x4 ?
Stampede 4x4 1415 1Y 2400kv, 4S 5200 30C
As the 1/10 rally has a different motor mount design from the slash 4x4 the stock one will just have to do until someone makes a replacement.
Pay It Forward.
the bearing look's to be enclosed a bit better than the stock 4x4 one.
*Proud Husband of United state's Air Force wife.*
ya the hole shaft looks sealed offon each end
summit /mustang /stampede-2s spc lipo
Just get a higher quality bearing with the stock mount. I did, and it worked fine in my platinum 4x4...
Disclaimer: Not saying it will handle 6s with a 1/8 motor though...
Ya can't polish fertilizer...