hello, what is the propper setting for the internal clutches for the forward and reverse gears ? like if someone screwed with the tension screws on the cluthces inside the transmission. there are no external holes to get to the screws. reason is even at low idle my truck rarely will shift into reverse and when it does its difficult to get back in forward. if i shut it off and restart it , it shifts that one time, so i think the levers are not in all the way when its running. is there some kind of base setting to start with so i dont have to take the trans apart 10 or 20 times or more lol
The FWD/RVS pawl adjustment when I FOC'ed my Maxx was the screw just flush with the hole like in the pic below.
Look out for the tree/crunch!
LiPo? Naw NITRO!!