I'm using my TQi system with all my trucks, including a 1/5 scale buggy, but need to lengthen the temp sensor lead for that one. Is it possible to splice in a length of wire near the receiver.
Also, is there an alternative ignition kill switch to the Killer Bee that can be used with the TQi system. All Traxxas 2.4 GHz systems are listed as incompatable with the Killer Bee. I really don't need a 30# missile running around in case of a throttle servo or receiver failure at full throttle. I have a mini servo and Great Planes Large Scale aircraft mechanical switch, but building it small enough, and rugged enough for a buggy, is challenging.
Last edited by Chief409; 10-05-2012 at 08:05 AM.
Slash 4X4 SSC , T-MAXX, Revo and Bandit