Hey every one I have been having problems with my slash 1/16 every time I turn the model right or left it
throttles and when I pull the throttle it does not do anything. I have tried switching the servo and speed control around in the receiver box but I get similar symptoms and am not sure what else to try.
Have you tried it with the servo unplugged?
If you pull the throttle trigger and it steers the truck you have to have the plugs in the wrong port on the receiver. Stock receiver has multiple servo ports to enable you to use dual servos. My hunch is you have the ESC plugged into a servo port.
Rusty - MERV - Pede 4x4-Alias
SPC Lipo Power
I am with Dad on this one... that is the first thing that popped into my mind. Traxxas Rx's are unique on that they have a dual steering servo feature.
Whatever it is I just typed... could be wrong.
I thought the same as Jimmie and Dad did, but he said he switched the plugs around in the rx, but no improvement. It definitely seems like the plugs are in the wrong place, but idk how much he experimented with switching plug inputs.
I with carbon on this one! Wait can I say that!
I don't see why not 50! haha