IN THE TITLE I MENT .26, sorry im tired and didnt check over the post. (edited for you--Double G)
selling my 4908 tmaxx 3.3. i replaced the stock 3.3 engine with the ofna picco .26 max engine, the rear center driveshaft with drive cups and a dogbone, the plastic one just didnt hold up to the engine, i got rid of the stock shocks and springs for integy piggy back shocks and springs and i put reverse on it, i didnt use it for racing, only in the yard bashing and wheelies, so incase i couldnt make a turn, i just flip a switch to put it in reverse and back up. it has the 27mhz radio and reciever, havent had an issue with it, it does have a body, but its a basher body i got off my friend just to protect it from any flying debris, and the body is really beat up.
This Tmaxx also comes with
-4908 owners manual
-4908 parts manual
-integy piggy back shocks and integy springs
-an ofna picco .26 max engine
-17mm hex's and a waterproof Traxxas 2075 servo for steering.
-also has a hump pack battery pack so you dont have to deal with buying AA's for the cars electronics.
-it has posi traction in the rear and also comes with reverse.
-it has after market tires that use 17mm hexes that it comes with ( i dont remember who makes them) which are the ones with the blue rims. the rims arent in great condition, the blue is flaking off but the tires are in great condition, with 90+ percent left, i have only ran it on grass)
- the other tires and rims are the stock tires and rims.
- it has an ez-start system on it, and comes with the wand and two batterys.
-has the charger for the batteries for the ez start system
-it comes with a rechargeable glow wand and the charger for it
- it also has 4 extra shoulder screws and some other random screw for the truck
- comes with an extra one way bearring that i have been told will probably work again if i oiled it
-has extra teflon washers i had to buy when i lost the one in the transmission when i was putting in the reverse
-has 3 extra 17mm hex's
-has 4 brand new12mm hex's for the stock wheels
-has the stock plastic chassis braces, i replaced with aluminum chassis braces and transmission skid plate
- comes with extra glow plug
-has extra front and rear bumpers + mounts
-has an extra bearring for the axle carrier
- comes with brand new primary gears , forward and reverse, TRA5396X
- comes with a brand new glow lead wire
looking for $450 OBO
Any other questions? just ask in pm or on thread
open to trades, just offer!
Last edited by Double G; 05-29-2012 at 12:06 PM.
Bump, looking for cash by paypal OR brushed/ brushless 1/16 scale or brushed 1/10 scale; boss 302, emaxx, e revo, merv or whatever, offer me
bump, this thing is RTR, offer me, dropped to 400
Last edited by naturalstrike; 05-30-2012 at 06:07 PM.
bump... offers are welcome, price to 350
i will throw in the original 3.3, not sure exactly how much fuel through it, it still worked until the bearing in the crankcase went bad.. it just needs that and will run again, it all taken apart right now, but i will put it in the sale as well. considering parting this out.
interested in a 1/16 e revo?
Slash 4x4 VXL/3Racing sakura D3
got pics? or a link to your post? ill check it out and let you know
How about a used brushed 1/10 slash 2wd tq 2.4? Comes with spare drivshafts, the box it came in, a spare extra battery, the stock battery, the manuel, the parts diagram, a spare titan 12t, and everything it came with. (PS The replaced titan motor has only been used about 4 times) PM If any questions...
ill think about it , but im looking for a smaller 1/16 for my sister to play with, im going to mess with it some until i get something like a erevo brushless. but ill get back to you if this sale doesnt happen
bump.... 300+ shipping...
need to get rid of this today.... 300+ shipping.
So, my slash is out of the picture now? LOL
decided to see again if anyone wanted this, it hasnt been driven, but i just started it and checked all electronics to make sure it all still worked, and it does ! and price drop, realized i was out of the price range, asking 240 + shippinng OBO