How do i enable LVC on my E-Revo Brushless 1/10?
This car (maybe all of them?) have the Mamba Monster.
There are no buttons on the ESC that i can see.
Castle Link, can get one cheap off Ebay.
Refer to this to setup the Mamba Monster ( MMM ) esc for maximum performance:
CASTLE LINK GUIDE
Would you go flip my truck back over??
Oh? Is that the only way to do it? with the Castle Link?
http://www.castlecreations.com/support/documents/drivers_ed_guide.pdf, page 20, for manual programming. You can set it with trigger pulls but unfortunately cannot change the Auto-LiPo setting, which depending on firmware version is 3.0 or 3.2 volts per cell. I'd recommend a LVC of 3.4 or 3.5 volts per cell.
Alt-248 on the number pad = °
LVC is default ON and set to 3.2v
It is on as default from factory