I have a traxxas slayer 4x4 nitro, works fine no problems. Except last time I ran it I left the receiver switch on. And needless to say it died. I am not about to go spend 30 bucks on a charger. Please post all your ghetto ways of charging a receiver without purchasing the expensive charger. Thanks in advance for your ideas.
**Please watch the language, anytime you see ** replacing words you wrote edit them out.**
Last edited by Double G; 09-22-2012 at 06:50 PM. Reason: language
Um, depending on what battery you put in there, you can just replace the batterys with double aa's. If you have a rechargable battery in there, just recharge it. If you don't have a charger to charge it, then, sorry, you'll have to get a charger to recharge it. OR to make it cheaper just put some double aa's in the reciver. That's what I use and they take alost 50 run before they go dead.
Hope this helps!
How do I convert the receiver to use AA's? Seems like all it can do is connect to a charger. I'd love to just use the AA's that would make it a lot easier.
the only problem is running off AA's is your only giving your servo's 4.8 volts. a flat 5cell pack is 6.0 volts and gives your servos max speed and power!!! full potential servo action!
Thats fine with me I'm not super into RC cars, its just a spare time hobby so as long as it gets my weekend toy running again I'm happy lol. Is there a guide somewhere to convert?
part# trx3039 4 AA holder it $4 - $5
4-5 Dollars is just what I'm looking for ! haha good looking' out man thank you.
Will that product work for sure on my slayer?
Yep! It will!Will that product work for sure on my slayer?
Aweome! Placing order as we speak, thank you so much for all your help!
Your welcome! If you need any other help, we're here to help!Aweome! Placing order as we speak, thank you so much for all your help!