Using all stock ultimate ESC and transmitter box, where do you mount an antenna???
Hey, does anyone know if STRC has any full green chassis left?
Does the guys at STRC have a electrics mounting plate for the ESC and room for my RX?
Sent from my iPhone4
Whatever I just said.. I'm probably wrong..
cant answer the green strc chassis question but i have one also put this on my racer
thought i would post some pic while waiting on other parts
I wish I knew of a place that could anodize I'd totally go with all red pieces oh well!
Sent from my iPhone4
Whatever I just said.. I'm probably wrong..
blknryzn did you make that capacitor?
update almost done missing motor/esc and reciever
update put a 4600 in there for now pairing it with a mmp for now. till i decide which one i really want to buy. got rec box in place and found a body that fits will have to figure out the post spots will be and will post pic. body is dhk optimus body
Anyone know when STRC is going to have more chassis for purchase?
I have emailed them twice in the last few weeks and no response.
put motor in along with body posts have to clean up wiring but almost done gonna do a test drive today running 2's not 3's geared 14/54 right now
ok test drove the pro 4 and like it alot on 2's but i just couldnt pass up the deal i got on a 2400 with the mmp running 3's geared 14/54 will be changing that after test runs. took me so long with the build i didnt loctite everything i should have will be breaking it down and do a rebuild to make sure i do that. wiring is a mess will clean that up also
Hey blknryzn do u race ur buggy with electric 1/8 buggys or do u just play with them??? I am just asking man.
UR RIDES LOOK GOOD BYE THE WAY!!!!!!
plan too sid just have to get track time they get hit with the wow factor **** ty sid
Wow the green looks awesome. Very nice build. If you looking for orange or green bell cranks I see Steve just listed them along with the LCG parts.
The limited edition orange and green steering bell cranks for the 4x4 have been listed at STRC and also the LCG parts have all been listed at aSTRC for those that are looking for new bell cranks and or any LCG parts.
I have been super lazy as my new GTR shocks are at the our hobbyshop but I didn't order springs I need yet so I can get my 4x4 LCG Slash setup up better overall. Need to start working on that.
I am drooling right now. I absolutely love it. Nice build. I want one!
Sent from Oser world
hey guys here is the answer on the chassis
To sidney tripp
we are so backed up right now in production we are trying to get them back by june hopefully.
Team STRC Customer Support
My orange STRC Slash
The General Lee body I painted to go with the orange chassis
No Limit RC of Maryland
very nics slashD
Just wondering if anyone has had issues with their chassis. I have seen the bottom plate spur gear cut out issue that has been posted but I have come across another issue with mine. The rear hinge pin holders that key into the chassis, the keyed part has broken off on the front of both and one of the holes in the chassis has been hollowed out and there are stress cracks around the outside of the hole.[IMG][/IMG]
Wow!!! That is crazy.
Did that happen from a big jump our just normal wear and tear?
Might check mine to see how they look.
No big jumps this is my race truck it sees the track and bench, our track has one "big" jump but you get less then 2 feet of the ground. The other track I race at is an asphalt oval so no jumps there and there is not enough speed involved at either track to do that type of damage.
turnleft327 The only time I have stretched holes on actually any chassis has been when my screw comes just a tad bit loose and then lest the hinge pin brace be able to move around some and also lets the screw act like a reamer. When this happens then I have had holes on a chassis stretch out some. It is very possible that they where a tad loose and on a 4wd SCT I know it can happen very quickly and easily and before you know it a few runs have been made like that and thats probably all it takes to possibly stretch a hole out like that. Every time I have did that to mine it was loose. I did rip one off a touring car chassis that was drilled very close to the edge and hit a sharp corner on the track. It was ugly. Lol
Steve has I think 2 more orange chassis setups and 2 blue ones available. Once gone no more orange. First week in August he will have more of the STRC 4x4 chassis kits in. It is possible that a slight increase in price might happen as the material pricing has gone up since the first run of these chassis's but should be around $10 bucks but still easily the cheapest setup around for quality LCG Slash 4x4 chassis.
ty wyd10 looking to get another lcg for my son
wyd10 I know for a fact that the screws were not loose because I check them before each run and I had a hard time removing them when I did take them out to change my slipper to a center diff. At the time tose pics were taken I had maybe 15 battery packs total threw the new chassis. When I built the kit I made sure all screws had plenty of loctite on them and I even let it sit for a day before I even turned it on to make sure the loctite had dried. I do like this chassis setup but I think there are some flaws and this is one of them. I do not think the screw being loose is what caused this anyway I think it was the keyed part of the hinge pin holder that broke off that caused the screw to loosen and then it caused the chassis to hollow out.
Hopefully soon I can get another lcg 4x4. I barely got to use mine. Im going to build mine with tekno parts and maybe tekin or tenshock motor. I hope there is a chassis available when I need it
Sent from my SGH-I317M using Tapatalk 2
Can someone please help me with what would be the best setup for my Slash 4x4 STRC LCG chassis which has the Proline Protrac kit fitted to Proline Caliber tyres. I have all Tekno drive shafts and GTR shocks with AE springs as well as the new TLR Ten SCTE 2.0 shock/spring combo (not using yet as seems a bit soft). The rest of the stuff I got on is Tekin RX8/Pro 4 4600, Savox 1256tg servo, lunsford titanium hingpins and turnbuckles and full Acer ceramic bearings all round.
Can someone help with a setup sheet that could work well with my current setup??
Blknyzn, What are the shocks you are using on your green car? I have installed the Proline Protrac kit and the handling now is phenomenal. You should try it.
been away for a sec they are d8's from the vorza buggy
these are my strc chassis blue/racer orange/rally green/buggy
Last edited by cooleocool; 08-11-2013 at 07:59 AM. Reason: merge
What 1/8th shocks do you have? I bought some from Ofna I think and they were bigger than Emaxx shocks. I really like the 13mm SC10 4x4 shocks as well.
96mm d8 shocks all the way around. yes I have those too on the blue racer I just tried different set ups on each one.rally has proline gonna try the gtr next.