Traxxas XO-1 Temperature and RPM Sensors with Airtronics or Other Radio
Has anyone used the stock Traxxas XO-1 temperature and RPM sensors with another radio? I am at the point where I am ready to install the Airtronics RX-461 receiver, but the Traxxas connectors are different from the Traxxas connectors. The Airtronics uses a 'Z' connector so I was wondering if it is possible to cut the Traxxas connector off and put a 'Z' connector on the end.
Airtronics sells a temperature sensor, but it's extremely short. Airtronics sells the RPM sensor, but I really like the way the stock Traxxas XO-1 RPM sensor is setup so it would be great if I could keep using it.
Let me know what you have done or your suggestions.