So locktite isn't an option because its plastic, already stripped one position from over tightening. Tire glue?
Yes CA glue is like using Loctite when you are putting a screw into a plastic part.
Rusty - MERV - Pede 4x4-Alias
SPC Lipo Power
Simple permanent fix is screw installed from the back of the shock tower to the front.Then install a nut with lock-tight.I used towers
conversion table to get mm screw size.Went to A-main did a search was able to get all black hardware.Note RPM's back tower is
thicker than the front.
Slash 4x4 MT
I know permatex makes a threadlocker for plastics. Not sure if it would work with a metal screw fastened into plastic. May be worth a try.
Thrash It, Bash it, Break it, No Regrets!!!
Duuh, longer screw with nut is the answer. Thanks allot Having to go home cause your shock fell off sucks, happened twice now.