alright guys, i got my sc401 4000kv and ex4 esc in the mail! i was curious about what the order of the wires is on the esc? any pics or directions
No order on a sensorless motor, just hook it up
If it spins the wrong direction simply swap any two wires to reverse it
Xerun 150 / Tenshock SC401 3500kv
do you know what would work the first time cause im going to connect ir straight to the esc and dont wanna rip it off after i get it and find our its wron
If you're going to solder it directly to the esc you need to make sure you've connected it right. The only way to do that is to run it first, then solder.
My Black & Blue Rally is faster than your color...
like hold it to the post things and press the trigger
how would i run it first