I am thinking of trying some stiffer Losi springs as I really dislike the traxxas offerings...
I have a pair of VG racing but they are almost too stiff and seem to be "bigger" than the top/bottom holders to where it actually popped over the bottom holder once.
Does anyone know which size I need to order for front/rear?
I see there are 2, 2.5 and 2.75 inches available.
2" for front
sl2sh, p4de trail truck
I also bought VGracing and was dispointed by how they where long and stiff.... So long that the front springs were just perfect length for rear shocks!!!!
The best progressive spring I have found so far for my stampede: (I have big bore with stock top/bottom holders)
Rear: VGracing progressive Front
Front: Traxxas Springs Rear Progressive +20% Blue 6868
I bought many spring, some where too long, many were too short, but I finally found them. And they are perfect!!!! Stiffness is perfect, length is perfect (I still can put preload to adjust the height.)
Last edited by emmanhello; 11-14-2012 at 06:08 PM.
I am going to copy your setup bro thanks...peace
Famous last words...watch this!!!!
Just did this. May be awhile before I can test it as I had to sent a bent driveshaft to Tekno to replace.