i didn't like where the ESC was mounted on top of the tranny...so...i moved it...between the front shock mount and the tranny...



seems like it fits perfectly and the motor wires just barely made it...i didn't want the most expensive part of the truck sitting all exposed at the top...so i figured...i'll just drill the Tekno ESC plate and mount it onto the shock mount...worked ok...not perfect...but at least the ESC isn't sitting so high...

also...bought a HR "roll bar"/handle...the second metal handle didn't fit...it was rubbing on the motor...so i just left it out...i'm thinking i should just leave it out all together...but...wanted at least something to prevent serious damage in the event of a upside down crash...