What would be the best castle motor to put into my 4tec i just bought one off ebay for 20 bucks and i had to give it a new rx/tx and servo but now i am at the motor issue i have the 2200kv in my 4x4 slash but i never dealt with a 1/10 scale castle motor so i need a bit of help
Castle is a good set up for a 4 tec but I like the vxl system in it better because you get no delay between forward and reverse like a castle system. I have the vxl in mine now but I had a sidewinder with a 5700 kv and it worker pretty good.
ok so you suggest the 5700kv then ok great i was thinking of setting mine up with rally setup for hard surfaces then in dirt what would you suggest as far as tires and suspension
Take a look at this thread if you really want to rally with your 4tec.
Also see the stickie above about doing the 3.3 diff swap. It's really a must do if you upgrade to brushless and lipo power. The stock diffs with get eaten up with the extra power. I have 5700 castle in my 4tec, and I have almost all the parts I need to do the diff swap and also replace all belts, pulleys and bearings on the car.
Slash BL-Pede-E 4Tec-FLM EMAXX-Wraith-AX-10-SCX-10