Im having Bellcrank trouble. The Rpm pins that hold the B-crank wont fit into the chassis/nor reach the chassis. The chassis does not have the "under housing" which hides the tops of the B-crank screws. I was thinking about running a threaded screw from the bottom of the skid, throughthe crank,and through the chassis.....
Last edited by 911dott; 01-15-2013 at 03:02 AM.
Well I was just eat'n sum pede and drink-n a slash
I had to get longer screws from the hard ware store,but i had the stock skid plate.
Here's a pic of one on remounted[IMG][/IMG] the servo on.
Built Ford Tuff With Chevy Stuff.