what gearing do i need to reach top end with a mamba monster 2200 kv what gear and pinion? Not worried about temps thanks and i have looked all over and cant find a thread of it
Start with 25t-26t pinion and 50t spur and go from there. Make sure you have good lipo batteries (high mAh and C rating) since high gearing can consume lot of power.
I run my mmp-2400kv with 4s-5s gearing 23/50 at the moment since i can't find a higher pinion with 3mm shaft
For your 2200kv 5mm shaft, there are lot of options for higher pinions.
thanks man i will try 19-25/50 try different gearz
I run a 38t revo spur with a 19t pinion. That combo on 4s is geared for right around 85mph according to brian g's speed calculator.
I race Associated, I bash Traxxas. 28 years in RC