New hardware, needs tuning - questions!
Hey Guys -
I got my new motor and turn fins yesterday. Got them installed last night. WoW! that motor has some torque! I used my 25c 2s 4000mah Lipo with it today, and it is very smooth and controllable.
I do have some questions though, as i might have to tweak some things. It would be AWESOME if anyone has some suggestions.
1. When it's running near full throttle, it leans to the starboard side - a lot.
2. It also wants to pull left, again quite a bit. It's controllable, but annoying.
3. It will turn left ON A DIME, and usually at high speeds (Turn fins?) but it won't turn right worth a crap. I have to slow way down.
I can't figure this out, just by looking at the drag items (turn fins, water pickups, -they are even) so any ideas?
I have linked a few photos so you can see my setup.
Interior - Hardware
Leopard 3650 Motor - 2450kv
Proboat 60A Esc
Stock blast servo
Traxxas 2.4ghz radio
2s 25c 4000mah lipo
Wicked setup there! Looks pretty cramped inside.
Yes, it's very cramped. I had to change my mounting for the radio box to be able to fit the large Proboat ESC
Originally Posted by MotorStuff
Tags for this Thread