Results 1 to 10 of 10

Thread: New E-Revo

  1. #1
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Montreal, Canada
    Posts
    599

    New E-Revo

    Hello everyone I'll ask some help for you guys, I got my new E-Revo brushless from my LHS and not familiar with the MMM castle set-up, my question is how to set-up the esc to Low Voltage? for I want to use my lipos in it, I have the castle manual, but it doesn't explain how to set the lipo LV set-up, I read also my users manual unfortunately it's not for the brushless edition nor the brushed edition manual
    Sharing is the best thing to do on EARTH legally.

  2. #2
    RC Turnbuckle Jr.
    Join Date
    May 2011
    Posts
    7,262
    you have to get the castle link usb program then go to their web site to set your ESC to any way you want it (LVD, braking, Fwd/Rev, etc...) normally if you plug your lipo's it automatlcally detect how many cell their is and LVD is set at 3.2v per cell.
    87gn will chime in and get you some very good info. GL
    Last edited by humayrayakongkinaon; 07-09-2012 at 01:44 PM.
    humay has left the building, peace.

  3. #3
    RC poster
    Join Date
    Jul 2012
    Location
    Long Beach, CA
    Posts
    17
    I was gonna ask the same thing, thanks for the answer! Where about's in Long Beach are you?

  4. #4
    RC Turnbuckle Jr. 87 GN's Avatar
    Join Date
    Mar 2010
    Location
    kansas
    Posts
    8,434
    correct the LVC is set at 3.2v per cell from Castle. That is a little on the low side I set mine at 3.5v, most set theirs at 3.4v which is a good setting. It is only a difference of 3~5 min.

    Refer to this to setup the Mamba Monster ( MMM ) esc for maximum performance:
    CASTLE LINK GUIDE

    And direct from CastleCreations ( the esc manufacturers ):
    MMM FAQ

    Driver's ED Manual

    LED warning light meanings
    Would you go flip my truck back over??

  5. #5
    RC Turnbuckle Jr. MITCH316's Avatar
    Join Date
    May 2012
    Location
    Australia
    Posts
    3,271
    Castle link is a must have if you are wanting to play around with your ESC settings.
    Rock n Rolla !

  6. #6
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Montreal, Canada
    Posts
    599
    Sharing is the best thing to do on EARTH legally.

  7. #7

  8. #8
    RC Qualifier
    Join Date
    Nov 2011
    Posts
    308
    Quote Originally Posted by Edgemoulic View Post
    Yes, both with or without a computer.
    FLM EMBE P4de "Digger" Slash MT Backsl4sh Summit

  9. #9
    RC Enthusiast
    Join Date
    Dec 2011
    Location
    Toronto
    Posts
    27
    Should already be set to run lipos with its default setting (I think it's 3.4v). The Castle Creations MM manual should tell you how to set it up too without needing to hook it to the pc. I would really make sure it is set up for lipos though as you don't want to break anything otherwise.

  10. #10
    RC Turnbuckle Jr. 87 GN's Avatar
    Join Date
    Mar 2010
    Location
    kansas
    Posts
    8,434
    Quote Originally Posted by Base View Post
    Should already be set to run lipos with its default setting (I think it's 3.4v). The Castle Creations MM manual should tell you how to set it up too without needing to hook it to the pc. I would really make sure it is set up for lipos though as you don't want to break anything otherwise.
    post #4 3.2v per cell..
    Would you go flip my truck back over??

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •