I have read so many threads on replacing revo shafts with summit ones, but I don't know about the compatibility with Tekno carriers.
I only have them on the rear so far, so....if I was to switch to the Summits, what would I need to order to have them in the back on the Tekno carriers, and on the front with stock ones?
Tekno carriers use 8x16x5mm bearings on the outside. You'd need 6x16x5mm bearings, I'd think.
Can you find those?
NVM: I did. Rubber-MR166-2RS-metric-bearings
Do you have the Tekno hubs?
Last edited by ksb51rl; 06-29-2012 at 11:26 PM.
Alt-248 on the number pad = °