Alright so through the "woop" section my front end stays planted but my rear end is all over the place? What can i change on the merv to help counteract this? I'm running 70 wt stock springs 1/4 preload in the front and 30 wt stock springs half preload in the back. Any tips about tuning or driving styles would help greatly. Thanks
I would start with some heavier oil in the back. I run 80 weight with black springs all around on mine. Start with some heavier oil in the rear and tweak from there.
Rusty - MERV - Pede 4x4-Alias
SPC Lipo Power
run less preload in the rear as well
Don't forget to adjust for plenty of sag too
alright thanks guys! and when i refill the diffs, it actually goes inside the big gear right? Like around the 3 little gears inside the actual diff? Thanks
I use 120k in the rear & 50k up front, I drive in very loose stuff. On road is typically the reverse. With a "tighter" front differential compared to the rear.