Hey guys what's up? I've had a problem when i tried to charged my nimh erbe batteries which were quite discharged. Yesterday I decided to charge them at 2.5A and to my surprise it charged more or less 200 mAh. I re charged them and it charged 500 mAh. Today i used my erbe believing it was fully charged and it run out of battery very fast. Instead of charging them at 2.5A, i charged at 1.2A but only 1000 mAh aproximately were charged. Any suggestion?
what mah is your bat rated?
Check your settings for the capacity cutoff. You can set it to cut off at a certain mah. Could be a possibility.
ERBE, Summit, Sl4sh MT, P4de, 1/16 GD 4x4
They are the stock 3000 mah nimh batteries
I don't think that the cut off has been changed...
How old are the batteries?
How long did they sit stored since the last usage?
ERBE, Summit, Thunder Tiger MT4
It sounds like the battery developed a memory. The only thing to do is pitch it in the trash or try a discharge/charge cycle about 5 time to see if that helps.
Sent from the cockpit of my Jeep Wrangler
My Black & Blue Rally is faster than your color...
Sounds to me like a cell was damaged by running it too low. This would explain the early peaking. Another possible explanation is that the EPP charger might be messing up.
If you're gonna be stupid, you'd better be tough.
They were stored like 2 months... the truck is quite new, i've bought it in january. Any idea?