Page 1 of 2 12 LastLast
Results 1 to 40 of 57
  1. #1
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310

    parts im going to be adding to my slash 4x4 by august!

    43$ TKR6852X tekno axels
    14$ SPTST1654S alluminum hex's
    20$ Outerwears Slash Black Flame Shockwears OUT44-2526-24
    20$ Golden Horizons Aluminum Motor Mount Silver GHH05252
    54$ Integy XLS Piggy Shock Set Slash 4X4 INTT8537BLUE
    90$ Integy Alloy Conv Set, Bl: Slash 4X4 INTT8547BLUE
    24$ Golden Horizons C Hub, Silver: Slash 4x4 GHH05208
    24$ Pro-Line Ford F150 Slash Body PRO331400
    11$ Integy Graphite Center Drive Shaft 1/10 Slash 4x4 INTT8542BLUE
    35$ Integy Steel Roll Cage for Traxxas 1/10 Slash 4X4 INTT8527


    this is just some stuff i have been checking out online thinking about ordering these are the exact prices with tax! it will cost roughly around 350$ not alot i know concidering within the last 2 months i dropped 1800 into my slash..... im just getting to the point where i feel like my slash is breaking every time i run it then i fix it and it breaks again so i dont really get to use it so i figured these parts would make it durable enough to not break on me i hope because if i put all these parts on it and it breaks i will either sell it or run it over with a car because im about to be like 2200$ in and nothing to really show but my rc car LOL

  2. #2
    RC Racer
    Join Date
    Feb 2012
    Location
    Sacramento/Santa Barbara
    Posts
    172
    Instead of the integy shocks you should go for the Proline ones they are better quality besides that everything seems great


    ---
    I am here: http://tapatalk.com/map.php?hxe0ew
    Sent from my iPhone using Tapatalk

  3. #3
    RC Racer
    Join Date
    Mar 2012
    Location
    Georgia
    Posts
    100
    +1 on the Proline PowerStrokes shock. Just remember that they do not come with fluid in them.

  4. #4
    RC Champion
    Join Date
    Sep 2010
    Location
    the giant boot. Anybody?
    Posts
    2,726
    The traxxas stock driveshaft is way better than the Integy one, If the alloy conversion set is the one with the aluminium arm's it is a worthless set. DON'T DO IT! Just get RPM arm's traxxas aluminium steering, castor and rear bearing carrier's. Near bullet proof setup with that stuff. I'd do the Powerstroke's or big bore's. You can even get a set of Vorza D8 16mm big bore shock's for less than the price of the Proline's. If your a basher I would stay away from the tekno's, look into the MIP Xduty's, they are way better for bashing than the Tekno's.

    The only part from Integy that is worth anything is the Rustler/slash aluminium gearbox, everything else is JUNK!

    Not to be harsh but if you have already spent 1800 on your slash, your doing something wrong. Weather it be buying the wrong part's or just being reckless with your slash. I have put $400 into my slash in the last 2 year's and that price include's the CC 2400 SCT combo, 2x 4s lipo's and the king head's mount. I have only broken 1 suspension arm and 4 body post's, that's it. Good luck.
    Last edited by I EAT DIRT; 05-01-2012 at 11:18 AM.
    *Proud Husband of United state's Air Force wife.*

  5. #5
    RC Racer
    Join Date
    Feb 2012
    Location
    Sacramento/Santa Barbara
    Posts
    172
    Rpm all around is a great choice that's what I have on my truck. I haven't broken any parts in a while. I'm also running rear mip

    Here my rig


    ---
    I am here: http://tapatalk.com/map.php?n1deqv
    Sent from my iPhone using Tapatalk
    Last edited by Bones547; 05-01-2012 at 01:17 PM.

  6. #6
    RC Qualifier
    Join Date
    Jan 2012
    Location
    St. Louis
    Posts
    380
    IMO, others may agree, integy is a very bad choice for aluminum, the center driveshaft they make is trash, many people they say that they have broke the tekno axles, and i +1 on proline powerstrokes

    Also if you have spent 1800 into your slash, you need to buy the right stuff, you could have saved so much money... alot of us have great opinions
    Racing in the Past, Present, and Future...MAYBE

  7. #7
    RC Racer
    Join Date
    Mar 2012
    Location
    Harrisburg PA
    Posts
    176

    Angry

    If u like the ford body get a JConcepts Illuzion "Ford Raptor SVT F-150" Body (Clear) (Slash)

    Imma get those Vorza D8 16mm Big Bore Shocks n see whats good wit dem

    Last edited by sbinqnz; 05-01-2012 at 02:15 PM.

  8. #8
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    ok so i had the mips problem is the stuff kept backing out bolts and pins and i cracked one of the mips and all i was doing was speed runs no jumping teknos suit me perfect as for the alum parts! as for the rpm stuff right now i am running rpm a arms and have broken 2 sofar lol i have the big bores on it as it sits right now and 1800$ yes because the plastic items keep breaking not to mention i dropped a mmm combo in the car + a set of mip rear <which i cracked at the top and my teknos are still perfect!!!! so ill only need the rear teknos im not much of a basher if any a ramp mabye at the most 2foot high going 10-15mph lol i like doing speed runs my trouble is the car hydro planes with weights and rolls causeing the plastic stuff to break

  9. #9
    RC Qualifier
    Join Date
    Jan 2012
    Location
    St. Louis
    Posts
    380
    the teknos are said to break in the middle of the shaft, compeletely snap. if your breaking rpm you dont need aluminum, you will bend them and they cant be bent back. if rpm breaks you buy a new one for a third of the price as aluminum
    Racing in the Past, Present, and Future...MAYBE

  10. #10
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    that is indeed true lol i am going to stick with the rpm's after giving it some thought also looking at some chassis's

  11. #11
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    no updates as of yet some by the 15th tho forsure

  12. #12
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    not sure tho still about all of them...

  13. #13
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    can i have a admin deleate this? ty

  14. #14
    RC Turnbuckle Jr. DiggerPede's Avatar
    Join Date
    Apr 2011
    Location
    Texas, Chemical Plant along the Gulf Coast
    Posts
    7,173
    Definitely no INTEGY. I have given them countless chances for good stuff. No way never again. I had their awesome look'n piggy pack shocks. All they would do is leak. LOL We warn you with good reasoning.

    Also a nother good choice for shock is the Losi Ten T shocks. They are a really nice set for $50. I also have Traxxas big bores, Proline Power Strokes on my other rides. But since thedreadend talked me into these ive been converted. Very good shock for the money if you ask me.
    Weak Revenge
    Strong Forgive
    Intelligent Ignore

  15. #15
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    i at the moment have the big bores also heres a updated parts list

    43$ TKR6852X tekno axels
    14$ SPTST1654S alluminum hex's
    20$ Outerwears Slash Black Flame Shockwears OUT44-2526-24
    20$ Golden Horizons Aluminum Motor Mount Silver GHH05252
    24$ Golden Horizons C Hub, Silver: Slash 4x4 GHH05208
    30$ tekno Drive Shaft 1/10 Slash 4x4 TKR6855
    35$ Integy Steel Roll Cage for Traxxas 1/10 Slash 4X4 INTT8527

  16. #16
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    also going to buy the blue rpm arms as they will go nicely with the shock covers

  17. #17
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    i am confused on the carriers and stuff that will fit with the tekno axels.... as they come with the rear carriers and stuff... any one give me a lil help and part numbers and prices? im looking for them in silver

  18. #18
    RC Champion
    Join Date
    Sep 2010
    Location
    the giant boot. Anybody?
    Posts
    2,726
    You can only use the Tekno carrier's with there axle's. They only come in plastic. I think you have to use the Tekno hex's also as they are 6mm hole's.
    *Proud Husband of United state's Air Force wife.*

  19. #19
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Austin, Texas
    Posts
    970
    I Eat Dirt is correct. Tekno uses a 6mm stub for increased durability, so you must use Tekno aluminum hexes to fit the stub. Tekno rear carriers are heavy duty and I haven't heard of anyone breaking one. Plus they allow for a crazy amount of adjustment to the rear suspension.

  20. #20
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    i appreciate ur help guys! thank you i will be ordering parts on the 15th hope u guys follow us on our builds 1st were going to be doing a slash 4x4 then were going to be doing a rustler! then a 2wd stampede!

  21. #21
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    ok heres a updated list

    43$ TKR6852X tekno axels
    18$ alluminum hex's TKR1654X
    20$ Outerwears Slash Black Flame Shockwears OUT44-2526-28
    20$ Golden Horizons Aluminum Motor Mount Silver GHH05252
    24$ Golden Horizons C Hub, Silver: Slash 4x4 GHH05208
    30$ tekno Drive Shaft 1/10 Slash 4x4 TKR6855
    35$ Integy Steel Roll Cage for Traxxas 1/10 Slash 4X4 INTT8527
    50$ alloy shock towers
    40$ body mount posts
    24$ rpm blue a-arms rpm80705

    also gotta look upsway bar kit lol
    Last edited by cmane419; 05-06-2012 at 11:09 AM.

  22. #22
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Austin, Texas
    Posts
    970
    Looks good. Not sure there is any benefit to aluminum shock towers and $40 is crazy for body posts that might not get you the body height you want.

  23. #23
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    they will i have researched my parts for weeks

  24. #24
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    here is the most current vehicle photo man these days can not come fast enough im ready to start adding upgrade tekno front axel and carriers on the car now


  25. #25
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Florida
    Posts
    360
    [QUOTE=Bones547;5158798]Rpm all around is a great choice that's what I have on my truck. I haven't broken any parts in a while. I'm also running rear mip

    Here my rig




    What kind of chassis is this? It looks like a slice LCG w/ SIC trencher tires
    Superman don't need no seatbelt-Ali
    2x SSC SL4x4

  26. #26
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    looks awsome bulletproof?

  27. #27
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    7 days till i start ordering parts! im so hyped..... it seems like days are stupid slow...

  28. #28
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    im loveing my electric i picked up 2 cars on craigslist for 100$ the other day for the next builds

  29. #29
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Corpus Christi, TX
    Posts
    466
    Quote Originally Posted by dyaugo View Post
    I haven't done hardly any upgrades to mine. Then again I probably don't bash as hard as some of you guys do, but just bought the car to get a feel for how it runs. I might move into Nitro in a few months
    Nitro is a whole new beast. If you do not like tinkering with your vehicle then you probably want to stay with electric. Nitro requires a lot of tuning and tinkering. People who are new to Nitro will spend more time working on their trucks than playing with them. Getting a Nitro to run properly is an art. It is great if you want to do that. If you want to just plug and play stick with electric.
    plz iz not a wurd

  30. #30
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    i love my electric i like the sound of nitro tho.... and my uncles runs fairly nice now that we got it tuned its just to much for me i agree with the life saveings thing lol ive sunk alot into my truck then again u get what you pay for with these things.

  31. #31
    RC Champion
    Join Date
    Sep 2010
    Location
    the giant boot. Anybody?
    Posts
    2,726
    WOW dude chill out. You didn't say anything about your knowledge about or with anything. I really don't think he was trying to attack you. friendly please.
    *Proud Husband of United state's Air Force wife.*

  32. #32
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    hes a buddy of mine we chat all the time in messages lol i am just explaining him the ways of nitro i am not trying to cause any harm

  33. #33
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    lol cheerios

  34. #34
    RC Champion
    Join Date
    Oct 2011
    Location
    Worcester, Massachusetts
    Posts
    1,398
    on my truck i have all RPM. Ive had it on there for about 6-7 months. In that time i broke two front a arms and a front shocktower. Im a hard basher when i bash. $12 for a RPM shock tower WARANTEE for life. or $25 o na aluminum shock tower that will jsut bend, My opinion is just get RPM for arms, bumpers and shick towers, and traxxas aluminum for the c hus, rear hubs and steering blocks. My aluminum has been on my truck for so long, and none of it has broke.

    some pics of my setup:
    http://s1169.photobucket.com/albums/r504/JoeR87/
    SL4SH Mamba Monster-Rustler Mamba Max 2400kv

  35. #35
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    traxxas dont stand behind there products like rpm lol

  36. #36
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    yes we are serious lol

  37. #37
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the wet stuff on the hot stuff
    Posts
    10,566
    Quote Originally Posted by cmane419 View Post
    traxxas dont stand behind there products like rpm lol
    There's hundreds of posts saying otherwise. Traxxas has one of the best Customer Support services period.
    The Super Derecho

  38. #38
    RC Turnbuckle Jr. DiggerPede's Avatar
    Join Date
    Apr 2011
    Location
    Texas, Chemical Plant along the Gulf Coast
    Posts
    7,173
    Quote Originally Posted by Double G View Post
    There's hundreds of posts saying otherwise. Traxxas has one of the best Customer Support services period.
    +1 to that. If there is any company to deal with they are a top contender for sure.
    Weak Revenge
    Strong Forgive
    Intelligent Ignore

  39. #39
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    traxxas has good products here is the updates list of parts im going to add
    43$ TKR6852X tekno axels
    18$ alluminum hex's TKR1654X
    20$ Outerwears Slash Black Flame Shockwears OUT44-2526-28
    30$ tekno Drive Shaft 1/10 Slash 4x4 TKR6855
    35$ Integy Steel Roll Cage for Traxxas 1/10 Slash 4X4 INTT8527
    24$ rpm blue a-arms rpm80705
    25$ sway bar kit
    6$ Blue Nerf Bars Slash & Slash 4X4 - RPM80625
    25$ Motor Mount Aluminum Slash 4x4 - TRA6860X
    3$ Cover Gear Clear Slash 4x4 - TRA6877A
    10$ Plate Motor Aluminum Slash 4x4 - TRA6890X
    18$ Shock Tower Fr Alum Slash 4x4 - TRA6839X
    16$ Sway Bar Kit Slash 4x4 - TRA6898
    18$ Shock Tower Rear Aluminum Slash 4x4 - TRA6838X
    14$ Front and Rear Slash 4X4 Arm Blue - RPM80705 -
    22$ Alum Body Mount Slvr Slash 4x4 - GHH5220
    2$ Spring Cups Lower Blu TRA Slash/Stampede 4x4 (4) - RPM73155
    4$ Quick Adj Spring Clip Blue Losi/Slash/Stamp 4x4 - RPM70325
    30$ J Concepts - ILLUZION -SLASH- TRUTH BODY - JCI0076
    11$ Fr Bumper+Skid Plate Blue Slash 4x4 - RPM80025
    10$ Rear Bumper Blue Slash 4x4 - RPM80125

  40. #40
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    310
    1st im going to grab the gear cover tekno axels and hex's sway bar kit the 28th ima pick up more parts but it will take awhile to get them lol

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •