What are the battery box dimensions? Thanks!
there is a post on the dimensions haven't found it yet be carefull with it though the corners of the box are tapered can't always go by that better question is what batteries fit
is that what you are looking for?
Whatever it is I just typed... could be wrong.
Tenergy 2s 1800 mah 30c
***** 2s 2200 mah 20c/40c
***** 3s 1600 mah 20c
Blue Lipo 3s 1800 mah 25c
Kypom 3s 1500 mah 30c
Venom 2s 2000 mah
Venom 3s 1300 mah 20c
SPC 2s 2300 mah
Integy 3s 1800 mah 35c
Integy 2s 1800 mah 25c
Boost 2s 2450 mah 45c
Boost 3s 1800 mah
Thunder Power G4 2s 1750 mah
Thunder Power G4 3s 1250 mah
Protek 2s 1600 mah
Maxamps 3s 1050 mah LiFe
Rhino 3s 1500 mah 20c
Lightmax 3s 1500 mah 20c here is an old list i found
if you have a dremel you can even open the box up a bit some batteries are a very tight fit!
How about the Gens Ace ECO 2S 2200MaH 7.4V 20C batteries? HobbyPartz says the diameters are 107MM x 35MM x 18.5MM(LxWxThickness). Do you think those would fit? anyone have any experience with these batteries?
I do have a Dremel...
A 20c battery is pretty weak plenty of better batteries out there try to get atleast 25 or 30c lot of places state if they will fit a merv
20C discharge is plenty...
So... no one has any experience with the Gens Ace ECO 2S 2200MAh batteries?
With your dremel as a backup you could make it work. You did see those battery ends? You will need to use an adapter or cut those off and solder Traxxas connectors #3080. One of my batteries is 102x34.4x20 and its 2250 65/130