My TQi Project - Separating the 4th and 5th channels to individual buttons
So I got this idea in my head the other day to turn the 3-way diff switch on my TQi in to two separate buttons to allow me to lock the rear, or the front, or both, or none. Out of the box you can only lock the front or both (or rear, if you switch the channels around) from one switch. You basically go, "unlocked, front locked, all locked" and well now I've modded it so I can lock them individually:
First I drove around for hours today sourcing these two rockers:
Roughed out the holes using a dremel, then cleaned them up with a blade:
And here we have it!
I just have to wire it up, and we're good to go!
Lemme know what you think, *cheers
Last edited by krallopian; 04-09-2012 at 07:08 PM.
Reason: Photobucket Bandwidth Exceeded - redid the links
Tags for this Thread