Hello people more experienced than I.
Preface, my 3906 emaxx has been out of commission for a little over 3 months. Striped a slipper gear and was in the process of moving- put it away. Once i got settled in, i decided to tear it all down, new diff lube, shock oil refill, total cleaning. It ran great before i stripped the gear. Put it all together last night , expecting a nice holiday weekend of zipping around since the heli is down, hooked fresh charged batts up, new batts in transmitter, turned it on, turned the wheels side to side, and gave it some throttle,,, nothing.
no noise, no nothing..
Things ive done.
unplugged every wire, cleaned it, replaced it back - even looked at all the wiring diagrams to make sure its spec.
probly a not so smart thing, but i had to see whats up- unplugged evx2, motor wires from it, i took a spare battery w bare wire ends and touched them to the motor leads directly. they fired off great. So by my reasoning the motors are not the issue.
any ideas folks?