whats the amp rating on the velineon motor?
i figured it out. 65 continous and 100 max. i also found out that mah and c rating affects temperatures as well as voltage. i heard before that high voltage increases heat but read that if you dont have a high enough mah or c rating that it could cause a little increase in motor heat as well.
This info is direct from the manufacturer. What are you trying to figure out?
Type: Sensorless Brushless
RPM/volt: 3500 (10-turn)
Wire size: 12-gauge Maxx Cable
Max RMP: 50,000
Weight: 9.24 oz (262g)
Current Ratings: 65A constant / 100A peak/burst
Magnet type: Ultra High-Temp. Sintered Neodymium
Connection type: Solder tab / TRX 3.5mm Bullet
My Black & Blue Rally is faster than your color...
the battery i need. i read that if i dont have enough mah and/or a high enough c rating that it could increase motor heat and cogging.
a 30c lipo will be enough . for mah on nimh 3000 should be the least , 5000 is ideal same goes with lipo , you should stick to the higher mah rating pack .
ya im thinkin about picking up a ******* 2s. gonna start a new thread about that though.