I have the rear one done but i can't find pictures of how to do the front mod. i am running tekno front sway bar.
Revenge 1/8 buggy
I did mine using cf rod ca'ed into a rod end and the other end just inserts into a 1/4 inch deep hole I drilled into the front body mount (my golden horizons front shock mount already had a threaded hole that worked perfect for attaching the other end)...it has worked well although my rc solutions rollcage takes the brunt of any front end impact.
heres mine also, i use a t-maxx first generation turnbuckle.
humay has left the building, peace.
this is a better pic of how its done with stock slash tie rods
The front of the chassis does not need to be braced because it is fastened to the bulkhead with 2 huge screws
If I remember correctly , correct me if I'm wrong , The rear however is missing these 2 screws, for some unknown reason. Huge design flaw imo, which seems to be corrected in the merv.
Because the rear chassis is barely hanging on to anything is why it needs to be braced. I bought the teckno mount for just the clever mounting bracket that allows for a rear brace. I use a stock push rod and screw it into the empty wing mount holes. Sorry no pics but its exactly as it sounds.
Last edited by candy76man; 03-27-2012 at 11:14 PM.
Its definitely got to pointless if you have a roll-cage....
The ERBE viking will never walk alone