I have an Emaxx 3906. It has a 2 Speed Transmission. The motor plate was modded, so that it can fit my MMM. It all started when I opened my truck to get to my transmisson. I finished putting it together and now I forgot how to mount the spur gear along with the other stuff. Please Help me
I know that these go together
This is the motor plate
I know that this goes here
Can someone tell me the steps to finish it. Sorry for the bad quality. Thanks!
The last picture you want to turn that around. Put the spur gear on and the circular thing with the hex goes on in to the center of the spur gear. Then the other pressure plate goes on facing the same way that you have the one in the picture. Spring then nut
I answered in your other tread on the Brushed side w/pics.
Look out for the tree/crunch!
LiPo? Naw NITRO!!
Thank! That really helped a lot!
Keep your manual handy for these troubling times or sometimes, what I do, is take pics with my IPod at each step so I remember how everything goes.
Slash BL-Pede-E 4Tec-FLM EMAXX-Wraith-AX-10-SCX-10