Results 1 to 2 of 2
  1. #1
    RC poster
    Join Date
    Mar 2012

    Newbie with an Opal 10T Triple and stock 2wd slash question!

    New to R/C and have a 2wd Slash stock. Guy at the track gave me an old opal 10t triple to use since I'm having issuses with crossover jump (geared to 19/86 and just barely make it). So far Proline GridIron tires are my only mod.

    Now the questions:
    1) Will it fit (haven't tried yet).
    2) will this run with the stock xl-5?
    3) If yes/yes, then what gearing to start with?


  2. #2
    RC Turnbuckle Jr. rag6's Avatar
    Join Date
    Mar 2008
    Accepting requests for bashing at GREENWOOD BASHPLEX in Pittsburgh PA!! Check the thread in the track buddy forum and reply there or pm
    1 yes
    2 no
    3 n/a, if you do find an esc that can run a 10t brushed motor in such a heavy truck, find the absolute smallest pinion, and absolute largest spur you can find( biggest spur I have heard of is a 92 tooth Hot Racing spur)> Check your motor temps after 5 min on the track. That is a really hot brushed motor for a traxxas truck, and will be hard, if not impossible to gear for. Good luck.
    Ya can't polish fertilizer...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts