Page 30 of 39 FirstFirst ... 202829303132 ... LastLast
Results 1,161 to 1,200 of 1528
  1. #1161
    RC Turnbuckle Jr. JimmyNeutron's Avatar
    Join Date
    Oct 2009
    Location
    Alma, Michigan
    Posts
    12,316
    Those are stock rims and tires.

    The abuse is pulling more amps out of the little batteries than they can provide... even if just testing.
    Whatever it is I just typed... could be wrong.

  2. #1162
    RC Competitor
    Join Date
    Sep 2012
    Location
    Arizona
    Posts
    84
    today I installed my rpm arms an carriers had to go to the hardware store an buy a lil alen wrench for those blasted little screws >.<

  3. #1163
    RC Racer
    Join Date
    Sep 2011
    Location
    Denver, Co
    Posts
    212
    Major upgrade week. Got the integy carbon fiber chassis, rpm arms and knuckles, sway bars, Traxxas cf wing, next will be new tires, and new body.
    1/10 Slash 4X4 VXL
    1/16 E-Revo VXL

  4. #1164
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Baltimore, Maryland
    Posts
    473
    Went rolling with my big daddy n my yellow little buddy. Don't call him yeller till you check out his vid on the 1:16 summit forum though.


    Modded to the Max
    Drive it like its Hot

  5. #1165
    RC Qualifier
    Join Date
    Jun 2012
    Location
    Australia
    Posts
    403
    Nice cars, that's the mini e Revo with the summit wheels and raptor body, right?

  6. #1166
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Baltimore, Maryland
    Posts
    473
    Yup, has a 6.5 Sonic 540 and a Mamba Max Pro and everything needed to handle the power. Pay attention to 50togo and Jimmie, they know their shtuff.
    Modded to the Max
    Drive it like its Hot

  7. #1167
    RC Qualifier
    Join Date
    Aug 2012
    Location
    Toronto
    Posts
    414
    Looks good Mrmerv76!
    Place looks good to drive around

    +1 on Jimmie & 50 knowing their stuff

  8. #1168
    RC Enthusiast
    Join Date
    Mar 2012
    Posts
    36
    finally installed my 3 piece T-bone, front chassis brace properly, 50wt oil all around and motor heatsync, ordered tan springs for the front and black for the rear.

  9. #1169
    RC Enthusiast
    Join Date
    Mar 2012
    Posts
    36
    doh! let someone else drive it and he broke an a-arm ...

  10. #1170
    RC Enthusiast
    Join Date
    Aug 2012
    Posts
    49
    Took it to work and during lunch time drove around semi-dry dirt track. Coworkers impressed with a little car accelerating faster than a normal 1/1 car lol

  11. #1171
    RC Racer
    Join Date
    Jun 2012
    Posts
    206
    amen to that.
    I would be playing with mine right now except for the fact I forgot to TURN OFF THE CONTROLLER!!!! 4 dead AA batteries make things NO FUN AT ALL!!!!

    1/10 Titan 775 bandit COMPLETED!!

  12. #1172
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,244
    Been there done that! Last week

  13. #1173
    RC Qualifier
    Join Date
    Sep 2011
    Location
    New York State: Snowbelt
    Posts
    747
    Quote Originally Posted by 50togo View Post
    Been there done that! Last week
    yesterday for me lolz
    SUMMIT |MERV * FIVE-T * REVO-E| T- MAXX-E

  14. #1174
    RC Qualifier
    Join Date
    Apr 2012
    Location
    Pittsburgh
    Posts
    778
    took it for a spin. set up the Fuze ESC a little better, moved some wires and stuff. sanded the rollcage for painting later and hit it with some jb weld. redid all the servo tape. cleaned my Tx, it had gravy master spilled on it.
    0111001101101001011001110000110100001010

  15. #1175
    RC Racer
    Join Date
    Jun 2012
    Posts
    206
    guess im not the only one who brain farts!!!
    1/10 Titan 775 bandit COMPLETED!!

  16. #1176
    RC Enthusiast
    Join Date
    Sep 2012
    Location
    Germany
    Posts
    43
    one time was a green light somewhere in my room at the evening ... hopefully i realize it was my controller so it only was for about 5-6 hours on
    the led is placed bad ..

  17. #1177
    RC Qualifier
    Join Date
    Jan 2010
    Posts
    502
    Back in the game! Sold my old merv 6 months or so ago thinking I was done with the hobby well here I em again! Lol

    Ready to modd it!


    Sent from my iPhone using Tapatalk
    7107 Merv Brushless, Soon to be Big Block

  18. #1178
    RC Racer
    Join Date
    Jun 2012
    Posts
    206
    Congrats!!
    1/10 Titan 775 bandit COMPLETED!!

  19. #1179
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Baltimore, Maryland
    Posts
    473
    Swapped out my 6.5 sonic for a 5.0 Sonic. Now I need to change spur to 45. Hung out with the boys at the dirt. Video to come.
    Modded to the Max
    Drive it like its Hot

  20. #1180
    RC Qualifier
    Join Date
    Sep 2011
    Location
    New York State: Snowbelt
    Posts
    747
    Crashed, tumbled about 10 times, only broke knuckle
    SUMMIT |MERV * FIVE-T * REVO-E| T- MAXX-E

  21. #1181
    RC Qualifier
    Join Date
    May 2011
    Location
    New Hampton, Iowa
    Posts
    311
    received a new chassis,springs, and rockers!
    http://www.youtube.com/user/dennerracingteamdrt

  22. #1182
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Pittsburgh, PA
    Posts
    662
    Installed these bad mama Jama's today! No more slop in my stock carriers! Nice!

  23. #1183
    RC Enthusiast
    Join Date
    Sep 2012
    Location
    Germany
    Posts
    43
    i'm looking forward to buy them, too
    Last edited by sascha; 09-23-2012 at 11:30 AM.

  24. #1184
    RC Qualifier
    Join Date
    Aug 2012
    Location
    Toronto
    Posts
    414
    Let us know how the bad mama jama's hold up after some abuse Maxximum

  25. #1185
    RC Competitor
    Join Date
    Sep 2012
    Location
    Arizona
    Posts
    84
    Installed my 43t spur from hotracing today order my three-80s 19t pinion even if the three-80 doesn't give me the performance i'm looking for it will drop right into my mini T no problem

  26. #1186
    RC poster
    Join Date
    Sep 2012
    Posts
    1
    hey can i put on slash 1 16 wheels on my rally vxl whout modifications? srry for my bad englis im dutch by the way xD
    well thank you. Greeting MrRohied

  27. #1187
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,244
    Put a new stock motor in just to try it on 4 cell!

  28. #1188
    RC Racer
    Join Date
    Jun 2012
    Posts
    206
    What do i need to change on my slash for top speed runs?? As far as pinion/spur? Right now they are stock.
    1/10 Titan 775 bandit COMPLETED!!

  29. #1189
    RC poster
    Join Date
    Sep 2012
    Posts
    5
    Looked for my MERV for 45 minutes, after letting my 4 year old drive it in 50% power mode on niMh. It was only 75 yards away, down the hill, under the fence & across the road. The MERV was unharmed, just hidden in the weeds. He wasn't sure which direction he drove it!

  30. #1190
    RC Turnbuckle Jr. Carbonrevo33's Avatar
    Join Date
    Jul 2008
    Location
    In a box on Hwy. 64 bashin' with Bradley Youngskins!
    Posts
    3,979
    Waiting for parts, gonna get new diff, axle bearings, and some more shims. Then....I'M GOING BIG!!!

  31. #1191
    RC Qualifier
    Join Date
    Apr 2012
    Location
    Ventura, Ca.
    Posts
    256
    The little guy was pullin wheelies and taking names all day before the front left a-arm snapped. Ordered a new pair of RPM's
    Mini Revo VXL 7107
    E-Maxx 3903 - He Lives!

  32. #1192
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Redmond, Wa
    Posts
    330
    threw my summit wheels on it and put a new lid on onbly 2nd body ive painted
    Extended P2de and Mini Summit

  33. #1193
    RC Competitor
    Join Date
    Sep 2012
    Location
    Arizona
    Posts
    84
    Got my hands on a traxxas 2cell lipo for my merv and a primal radient charger at the LHS so finally was able to test an make sure my novak system worked. part of me wants to go buy a spetrum radio an the other wants to grab another gws 75mhz 4 channel micro RX like i got for my microT

  34. #1194
    RC Racer
    Join Date
    Aug 2011
    Posts
    119
    Quote Originally Posted by tatsuvw View Post
    Major upgrade week. Got the integy carbon fiber chassis, rpm arms and knuckles, sway bars, Traxxas cf wing, next will be new tires, and new body.
    once you get the chassis tell me how well it stands bashing i plan on getting 2 one for my race merv adn one for my bashing merv.

  35. #1195
    RC Turnbuckle Jr. Carbonrevo33's Avatar
    Join Date
    Jul 2008
    Location
    In a box on Hwy. 64 bashin' with Bradley Youngskins!
    Posts
    3,979
    Went to the lhs to get some shims, bearings, and diff gears. Ended up coming out with the shims, 1 out of 4 correctly sized bearings (going to return them tomorrow, case the bearings were in fell and it was a classic mixup), and diff gears will be ordered and I should get them next Tuesday. Put the one bearing that was correct (It was also the only bearing I truly NEEDED, the others were meant to be spares) into the axle carrier. The replacement was needed because the outer ring in the smaller bearing had cracked all the way through. I then removed the rear end of the revo to put the shims in, and I learned that my rear bulkhead had snapped cleanly in half. I'm going to pick up the new one tomorrow as well. Here's a pic of the damage, sorry for the cell quality...


  36. #1196
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,244
    bummer!

    did a 54mph cartwheel for about 50 ft the slid upside down for about 50 more .picked it up and ran 64! stock motor on 4 cell!

  37. #1197
    RC Turnbuckle Jr. Carbonrevo33's Avatar
    Join Date
    Jul 2008
    Location
    In a box on Hwy. 64 bashin' with Bradley Youngskins!
    Posts
    3,979
    Good stuff 50! haha

  38. #1198
    RC Competitor
    Join Date
    Sep 2012
    Location
    Arizona
    Posts
    84
    got my pinion gear an some traxxas turnbuckles in the mail though found i cannot run my 19T pinion with a 43T spur without removing the back cover on the receiver box for the wires to go in. wish the vendor would hurry up an ship my bluebird 390 servos defiantly going hi tech after i kill the bluebirds for the sake of convenience.
    Last edited by Dadx2mj; 09-28-2012 at 08:52 AM. Reason: Content & Language

  39. #1199
    RC Turnbuckle Jr. Carbonrevo33's Avatar
    Join Date
    Jul 2008
    Location
    In a box on Hwy. 64 bashin' with Bradley Youngskins!
    Posts
    3,979
    Ran the Revo with my friend's Summit, and I finally put my rear diff out of its misery. New one coming in on Tuesday...

  40. #1200
    RC poster
    Join Date
    Jul 2012
    Location
    Denver, CO
    Posts
    3
    Got a some HR hubs, steel hollow balls, and bearings all around installed today. I really like those hubs, although my only comparison being stock or RPM. These did away with the play in my wheels completely.

    Since I live 10 minutes away from a park that has 2 different skate parks, a dirt bmx track and a designated RC track, I took it for a test bash...... and loved every minute of it. I only got a few pics today but it's a whole new monster now.

    Got a little muddy

    [IMG][/IMG]

    I realized after I cleaned it that I had 2 wheels backwards all day. Still handled great though.

    [IMG][/IMG]

    Here's one part of the park. In the back ground you can see the vert ramps. I break stuff on those though.

    [IMG][/IMG]

Page 30 of 39 FirstFirst ... 202829303132 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •