Here is what i have so far. Raptor body by proline.
I am using a 150 amp esc and I have a castle 2200 instaled
I made this esc holder out of 1/4" lexan.
I am using the bluegroove conversion.
I had to mod the rear body posts so the body would line up right. The top portion is from an e-maxx.
Wheels and tires are from a sc8.
nice, it looks awesome. is it heavier to the side with the gens ace battery?
Im young. And im Learning.
It feels alright but I won't know till I get some run time on it.
heres my coverstion. started life as a slayer pro. running a mm2200kv and esc. running a 3s lipo ans 22 pinion and 36 spur. the tranny is also locked in second gear. the truck is a beast its a awseome set up! i use it way more now then when it was nitro! pics are alittle dirty but i just brought it in from a bashing!!i also have them wheels and tires comin in the mail with the gold rings. i will post pic of them soon. also im in need of a new body.
heres a pic whe i first put the motor in
Nice job, I like the tekno conversion my buddy did it to his revo. Are you planning to run a shortcourse body on it?
Yea I run the slayer pro body on it. It's just not on in the pics. I wanting for the stock slayer pro clear bodies to be in stock so I can paint my own.
Are those badlands or the ones you can get at supa sales on ebay? Use to run proline buggy badlands on my 4x4 slash and loved them. Thinking about picking up some sc badlands.
There the eBay ones. There great in the grass and loose dirt.
How do you like the 2200 on 3s? I have a 2700kv motor I am going to try also.
It awesome! Has tons of power. Moves the truck pretty good.
Managed to get the esc and bec soldered up this weekend. Just waiting for my servo and reciver box to show up and improvement in the weather.
Changed up the body a little bit.
I borrowed some revo springs from a buddy to try on my slayer.
These are the front springs I have in now.
Rear ,not sure why these have 2 different colors. Slayer specific springs ?
Looking Good man! Took my to the local track this weekend and did awesome!
What are you running for springs and what weight shock oil?
Good to hear yours is working good.
There all stock. I never changed them. I probly should cuz there pretty soft with the extra weight.
Servo showed up today, now just waiting for a rx box.
Love using these servo's never had an issue with one.
I also have an E-Slayer Pro. I have a MM and 2650kv motor on it now. I was running it with a fully locked slipper because I kept tossing the stock slipper pads off. needless to say, it has WAAAAAAAYYYYYYY too much torque for that setup. I just got the Tekin e-clutch bell clutch kit and should be able to test it out in the next couple of days. I also need to get the mechanical brakes working properly now that I am using the bellclutch.
Both Slayers look great!!
Slash 2wd, Slash 4x4, E-Slayer Pro 4x4
First drive, 3s. Waiting for a reciver box before I venture outside.
Well I had a chance to try my slayer last week. Didn't go well ran off the road and into a ditch full of water. Fried my 150 amp esc in the process. Just ordered a new mamba monster.
Mamaba monster is here,they now come with a castle link.
Mounted a stampede radio box here.
I drilled 2.5mm holes into the leaxn and used the traxxas mamba monster esc hold down.
Going to also trim some of the extra lexan.
Black can instaled.
Will try to get the soldering done tonight along with the BEC and hope to haved it wired up and running in the morn.
I have had a chance to take it out and run it last couple days. I have broken both front lower a arms in two separate crashes and lost a universal shaft in the rear. E-clip must have fell off.
This is my hack job, still holding though.
I cut down some revo shafts for the rear. You can see how much bigger they are.
Instaled in the truck.
Did some tire grooving on my tires. Helped quite a bit, very loose track.
Mounted sc badlands on 17mm DE Trinidad wheels.
nice looking truck!
SL4SH Mamba Monster-Rustler Mamba Max 2400kv
WOW big difference in the first picture and last
I wanted to put a really cool signature but I ran
Made a couple small vids running the little track I built behind my house. I have the truck tore down and most the parts on my new build.
Some last pics.
Last edited by bentrocker; 05-03-2012 at 07:22 AM. Reason: pics added