If I wanted to use two steering servos would I use a "Y" harness for the two servos or put each lead into a separate port on the receiver.
Please note: I'm using the stock Tx & Rx.
Thanks to anyone/everyone.
It works either way!
So, if I was to use a separate channel in the Rx how to I get the radio (stock) to recognize it?
the 1/16 platform has 2 slots for the servo.... it has 2 inputs for channel 1, the steering channel
you dont need a y harness
2 slots for channel 1??? Wow. I didn't look at the receiver that close. I just thought it was basic 6 channel Rx. I'll have look a little more closely next time.
I think I'll do it then, cause I have some FPV gear on my car now and the weight is a little more which means more strain on the servo.
Last edited by Exploroman; 02-03-2012 at 11:32 PM.
You could also replace your stock servo with a stronger metal geared one. Getting two servos to work together without fighting each other can be a pain.
Nobody is born with experience