does anyone know if RPM makes bulkheads? I dont think they do but i was just wondering. Im not spending the money on aluminum and the stock ones break left and right on my modded 3.3
-Off the Jump!!-
They do not make bulk heads for the maxx trucks. But if your spending 8.00 on a set of factory bulk heads you could get a good set of bulk heads and never have to worry about them breaking. just stay away from integy.
no they dont make it due to its flexibility (I think). aluminum is much better choice as long as you get the good one, together with aluminum skids then cover it with RPM skid plates.
humay has left the building, peace.
Kid at heart......and always playin around
you can get aluminum bulks for $50 shipped off ebay which comes with both front and rear. best bang for the buck and thats the acncm bulks. take your pic, $8 repeatedly, or $50 one time................
there's no life like a LOW LIFE!
+1 i run acncm
Joshua 24:15 Choose this day who ye will serve
RPM just released bulkheads in black and blue for the tmaxx trucks I know they are available on the RPM site but do not know if your LHC will have them yet.
Now the axle carriers have had issues with the pillowballs popping out... Why? Simple, the flexibility of the plastic is allowing them to....
If they are using the same type of plastic,,, I'd pass on those bulks and just go with a reputable set of aluminum bulks, you will not be disappointed... You get flex in bulkheaqds and you are going to have driveline issues down the road....
I just did a little reading on their site,,, the plastic is the same but they claim of some re-engineering... To me certain things need to flex and others do not... Bulkheads are definitely on the No-flex list.....
Last edited by Nitronaught; 04-25-2013 at 03:43 PM.
All Lives Matter
United We Stand, Divided We Fall