Well for the 5th time my rear diff is stripped again This time when it stripped I had STRC aluminum diff cases for front and rear and the hot racing diff cup front and rear, and both front and rear diffs are shimmed too!!! And both with hot glue filled in around them in the bulkhead. WHAT IS GOING ON
78 mph E-Revo on 6s
65 mph Stampede on 3s
Is your slipper too tight?
I hear rc monster is gonna make their hybrid diffs again so when the diffs I just ordered go out I will get getting them.
Link'd!I hear rc monster is gonna make their hybrid diffs again so when the diffs I just ordered go out I will get getting them.
That's why my Erbe is on eBay. Just tired of fixing diffs all the time
Beatings will continue until compliance is gained
uh oh.... that didn't sound good
I'm really starting to wonder why i still am on stock (shimmed) diffs
my diffs also stripp every two runs.......(not shimmed jet)......i also have a Robitronic Hurricane no problems......whats the problem with that Traxxas diffs???
Yep i now have like 30-40 runs on both of my stock diffs, the front diff was shimmed after about 20 runs, and the rear diff was shimmed a few weeks ago. I also inspected the rear diff, and it was still fine. That is on 6S and 4S power . Shimming was needed though, there was quite some play on the pinion.