All right THINK I have about got my Summit figured out and my existing chassis is so full of holes, etc. from all the change of mind or new ideas am starting fresh with a new chassis. Also now have Jimmies old radio that I need to configure in with the unmentionable switch, which will end up giving me more channels than I will know what to do with LOL.
Also adding a winch and rear steer. The rear steer in on and working but not happy with the configuration as I am trying to make it modular and right now have lost the rear bumper but is modular. By modular I mean take a few screws out and the whole rear steering system will come off.
Another problem I noticed is the way it is now, when rear steer is activated the body posts are pulled rearward real bad. Problems, problems LOL stay tuned as I figure them out will post, so that it may help others as well. As I am now asking Jimmie help with his radio system I bought w/two Receivers and a radio with more switches than on the Shuttle.
First thing is getting a Hitec HS7980 to fit in the stock location, which I have accomplish, just need to get some pics and a little write up to how I did it.
Also building for longevity and will only be adding aluminum parts where I feel it will help.