Results 1 to 3 of 3
  1. #1
    RC poster
    Join Date
    Aug 2011
    Posts
    2

    TRX 3.3 tuning problems! Please help!

    I have recently purchased a TRX 3.3 of which the prevoius owner had all the tuning settings wrong. (did not run at all well). How do i reset it to factory settings?

    Please be patient I'm a bit new to this.

  2. #2
    RC Enthusiast
    Join Date
    Aug 2011
    Location
    Boise Idaho
    Posts
    43
    download the manual http://traxxas.com/support/PDF-Downloads-Current-Models and start out with the break in settings of 4 turns HSN and flush (1.5 to 1.75) turns LSN and the idle gap at 1mm, Then do the fine tune procedure from there. The Traxxas manual is one of the best that have seen for explaining the function and settings of a nitro engine.

  3. #3
    RC poster
    Join Date
    Aug 2011
    Posts
    2
    Many Thanks. I'll let you know how I get on!!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •