Results 1 to 5 of 5

Thread: MM Pro Fan

  1. #1
    RC Competitor
    Join Date
    Apr 2011
    Location
    Hong Kong
    Posts
    65

    MM Pro Fan

    To fit MMP into MERV, I note I should put out the fan to make it smaller to fit in. I found it is not an external fan with screw. Should I cut the plastic, or there are other ways I can do? Thank you.

  2. #2
    RC Qualifier
    Join Date
    Dec 2010
    Location
    Birmingham, AL
    Posts
    447
    I cut mine off with a dremel.

  3. #3
    RC Turnbuckle Jr.
    Join Date
    Feb 2002
    Posts
    5,078
    you unclip it o nthe sides, and it slides out the top

    when i took mine off, i ended up breaking it..... so i bought a new case, and left it on... my body still fit with the fan on, and i would rather have the extra margin of safety

  4. #4
    RC Racer
    Join Date
    Jun 2011
    Location
    slo cali
    Posts
    109
    i was wondering this also. most of the mmp's i've seen mounted had the fan deleted. anyone have pics of it mounted with the fan still on? preferably one mounted normally and not modded into one of the battery compartments.

  5. #5
    RC Turnbuckle Jr.
    Join Date
    Feb 2002
    Posts
    5,078
    it wont fit up on the esc side of the platform, i ultimately put it on the receiver side.... don't care for the receiver box.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •