Help Please! Need to know the the receiver channels for the servos on my summit 5607
Hi, I recently got a Summit 5607 from a friend and was working fine till i allowed my neighbor to use it. He was going through some puddles which was all good. Then the steering got stuck in full left turn and no throttle response from the transmitter. I turned everything off and back on then tried to use it again but the model would not respond, and the steering would stay in the same position. I have tried to re-bind it but had no luck. The link light would keep flashing red So i decided to check the receiver/link box for any water damage (There seems to be a little corrosion on some of the pins.) and possibly mixed up the wires for the different channels after i tried to re-bind the transmitter and receiver.
If anyone has any insight to the solution to this problem, it is much appreciated Thanks!
Tags for this Thread