This is my little ramp.
I stared by drawing out the curve on a piece of brown paper. Took me forever to get the arc the way I wanted it. Then I transfered it to a cardboard templet. Now for the fun part. I started with a piece of 4'x8' sheet metal. Traced out my templet hated it & changed it again. Finaly went for it & stared plasma cutting. Cut everything & stared tack welding it together. Got it all tacked up & started welding. I had the idea of making it height adjustable. So I cut round tubing one that would slid inside the other. Then drilled holes every 2" for the key keepers. I then welded spikes & feet on the ends of the tubing. To keep the ramps from sliding. Well tell me what you think. The Maxx has been banded for this ramp.
---Check out where the skid & the A arms have been hitting.
Last edited by 87 GN; 05-08-2011 at 08:38 PM.
Would you go flip my truck back over??