Results 1 to 3 of 3
  1. #1
    RC poster
    Join Date
    Apr 2011
    Posts
    4

    Lipo charging question for newb

    I've has my new 4x4 Stampede for 2 weeks and I'm ready for lipos. Here is what I ordered:

    Thunder AC6 Smart Balance LiPo/Nimh Charger/Discharger w/ AC Adapter for 1-6 Lipo/ 1-15 Nimh w/ USB to PC Software
    http://www.nitroplanes.com/thac6smbalic.html

    2 - Gens ace LIPO 5000mAh 40C 7.4V lipo battery packs
    http://www.hobbypartz.com/98p-40c-50...-hardcase.html

    Here are my questions:
    What connectors will I need for charging and running? (soldering is not an issue)
    Will I be able to charge 3s 5000mAh lipo's
    When I charge the 5000mAh 2s lipo's do I charge at 5.0A?
    Any tips would be greatly appreciated!

  2. #2
    RC Qualifier
    Join Date
    Dec 2010
    Location
    McHenry, Illinois
    Posts
    648
    Traxxas Female connectors for the Batts
    Traxxas male for the Charger
    balancing adapter/s should be included with the charger
    no problem with up to 6s lipo
    5a is the chargers max and is fine for your 5,000mah's
    When Boy When, Are You Gonna Get Your Act Together

  3. #3
    Marshal Dadx2mj's Avatar
    Join Date
    Aug 2007
    Location
    So Cal
    Posts
    21,433
    These are questions that should be directed to the manufacturer or vendor you are puchasig the equipment from. Traxxas does not allow of this type of tech support for other comapnies products on this forum.
    BlindMan Racing
    Rusty - MERV - Pede 4x4-Alias
    SPC Lipo Power

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •