Results 1 to 3 of 3
  1. #1
    RC Racer
    Join Date
    Dec 2010
    Location
    Edmonton, AB
    Posts
    233

    Looking to get ready for Slash season

    I'm just looking to get a round consensus on what you guys do to get your race trucks ready at the beginning of the season. I am planning on new tires/rims, a complete tear down of the trans and diff and a full lube on all other moving parts.
    Should I be doing anything else? The truck has sat on my shelf since November after the first few snow falls.
    I will be moving up to 11.1V lipos as well. What C should I be looking into for the VXL?

    And as always, thanks in advance
    Waffles!

  2. #2
    RC Champion
    Join Date
    Dec 2010
    Location
    Wisconsin
    Posts
    1,662
    Sounds like what ou are doing is good. 25c 5000mah or more for best results is what i've heard.
    Land of the free?

  3. #3
    RC Racer
    Join Date
    Mar 2011
    Location
    NJ
    Posts
    158
    I thought that 25-50c is more appropriate for the VXL or any brushless set-up. I am going to buy a 2s 7.4 5000maH 20c for a titan motor, but I don't think that LIPO would do very good when I get my brushless setup. Any1 know if the 20C will work good on a brushless setup?
    thx
    2wd Slash MMP/3800kv/Savox1258tg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •