Last edited by Slasher3; 12-29-2010 at 08:41 PM.
This is how I heat things up!
Just some of my Mono's
Last edited by cooleocool; 02-23-2013 at 09:50 PM. Reason: post merge
HK6XL Revo 4s 60mph Amsoil dealer
2 water pickups
het 600 42 engine
2 separate cooling lines
Last edited by ksb51rl; 12-07-2011 at 12:57 AM. Reason: merge
I want to preface with saying that i've followed the members posts in this forum for the spartan for awhile and have taken some ideas and used them because i thought they were neat. I by no means take credit for the ideas. I just felt they were cool enough to put on my boat! Thanks guys!
Last edited by lawsonjw27; 03-18-2011 at 01:34 AM. Reason: Pics
Here's my Traxxas Carbon Spartan!!! Enjoy!
Last edited by ksb51rl; 12-07-2011 at 12:57 AM.
HPI Sprint2 VXL
Slash 4x4 PE
This is my recent progress modifying the Spartan. Hobbywing's Seaking 180 AMP ESC partnered up with Castle Creation's 1515 2200kv Mamba Monster motor!!!
I had to flip the servo around and use the short throw hole in order to keep it from dragging the rod on the transom.Modified twin pick up rudder to fit the stock setback in order to save weight. (Kintech Racing)
I also bored out the stock brass bushings so the pin for the aftermarket rudder would fit snug.
Last edited by Sick6.6; 04-13-2011 at 01:17 PM.
Everything pales in comparison to DJ's Spartan wrap, but here are my Spartans. Modified and ready to run.
Cooling System Mods
Hatch Mods - Removed Rear Tabs
Last edited by cooleocool; 02-23-2013 at 09:43 PM.
I decided to paint mine, hope it sticks:
Last edited by roadrashracing; 05-08-2011 at 10:41 PM.
This is awesome! Nice picture! -cooleo
Last edited by cooleocool; 06-12-2011 at 04:23 PM.
Picked up the decals today after work...what do you think?
First run of today. Second run with the new Castle electronics,2 sets of trim tabs, aluminum water jacket, larger water inlet & outlet and 1/8th" ID cooling line.
Temps and speed from previous run;
Second run of the day;
New Castle electronics
Nice job Traxxas ! Customer service dept. is awesome!
Last edited by cooleocool; 02-23-2013 at 09:54 PM. Reason: post merge
A few pic's of my Spartan & Slash.....
Dual water outlets
And here is the one I just purchased from djmaincheese.....
Some pics of the non identical twins.....
A few shots of the retrieval boat I built this week.....
Last edited by cooleocool; 02-23-2013 at 09:56 PM. Reason: post merge
Pics of my second Spartan "built from scratch project", Custom paint job,(by me) lol, castle 1515 2200kv, castle hydra ice 240, running on 5.0 lipos 45c,i'n series, putting on a Prather 220 tomorrow... More pics to come of this boat and my 1st Spartan .... Vids to come soon if i can figure out how to get them here.... Thanks for looking!!!
Last edited by cooleocool; 02-23-2013 at 09:41 PM. Reason: merge
spartan1 castle ice 240 castle 2200 Prather 220
Last edited by ksb51rl; 09-21-2011 at 06:03 PM. Reason: merge
My brand new Gen2 Spartan w. stock electronics by Castle Creations.
Stable as a rock and crazy fast on 6s
The awesome trailer was made by Djmaincheese, the dude with the awesome boats in this thread. Thanks Dude, I love it
Last edited by Impgrin; 09-24-2011 at 07:10 PM.
Finally getting her together now tht summer's over
My new Spartan stock atm added 5000mah 3S 25~50C should be fun and ordered Trim Tab Adjusters and splash guard
Last edited by cooleocool; 02-23-2013 at 09:40 PM.
Last edited by ksb51rl; 04-17-2012 at 04:56 PM.
Last edited by cooleocool; 02-23-2013 at 09:58 PM. Reason: post merge
Yes Castle Creations is in KANSAS
My first R/C boat.....and my E-Maxx with lot of mod and Mamba Esc and motor!!
With my Chace boat.
Last edited by James1v12; 07-29-2012 at 07:22 PM.
Sharing is the best thing to do on EARTH legally.
Matt black with 2 coats of clear. Upgraded rudder, prop and hatch latch.
Last edited by Gards; 01-13-2013 at 05:39 AM.
Last edited by cooleocool; 02-23-2013 at 09:28 PM. Reason: post merge
hey guys i just made a fast boat stand that works really well! Made out of wood
full photo album at: https://plus.google.com/photos/10050...51491559514353
Beautiful pictures! -cooleo
Last edited by cooleocool; 05-07-2013 at 09:59 AM.
Last edited by Double G; 05-28-2013 at 10:07 AM. Reason: merge
I won't be running my Spartan anytime soon, due to the fact that a 6.5 ft gator eats ducks near my boating spot!!!
PM for info.....
My Traxxas Spartan and EdgeWater 318CC
Prather 215 and CNC X442
Upgraded water cooling jacket
Larger diameter cooling line
Trim tab adjusters
.187 Flex shaft
Carbon Fiber stand
Nylon boat bag
Powered by Castle.....
Last edited by cooleocool; 10-15-2013 at 10:27 AM. Reason: merge
Did you enlarge the tubing fitting on the spartan stock rudder ? If so, where can you purchase one that has same threads as rudder ? What size tubing ID/OD did you use ? Thanks.
Last edited by junebug70; 04-07-2015 at 03:08 PM.