After Black Chassis mod:
Pixar - Cars Mod...
My pede 4x4 rebuild
Here's my P4de looking like a Rusty. This is actually the body I was using on my Rustler. You can see the old body mount holes.
P4de w/ my other Trucks. 1 for street, 1 for track, 1 for off-road, all for BASHING!
The Guts! Nothing special going on here. When it breaks it will get replaced, and luckily nothing has broken yet!
Rusty / EMBE / P4de / Teton / Vorza / SRD250P
Esc broken off after a 40mph crash into curb. Surprisingly nothing else broke
Here is my conversion of stampede to rustler 4wd,
front shocks clipped out 6 mm and rears 9 mm by adding a pipe to the inside of shocks
the front and rear body mounts were build specially to fit rustler's body holes
102 mm Jconcepts G-locs tires are mounted on the fronts and rears
damper system was set to be parallel to the floor swings
front bumper was removed
Trying new aluminum beadlock wheel:
New body with winter tire:
Painted the new body:
Switched the sandpaw tire on chrome despardo:
Custom made shroud, works great!
My beloved pede with a pro line bulldog body/ trenchers
Running an SC8 / 3400kv Tenshock
Tenshock is da bomb diggity!
Here's my first painted body:
I want an avatar... 3000 posts here we go!
ProLine Bull Dog body meant for a Rustler with Losi Ten T wing and mount
Rusty - MERV - Pede 4x4-Alias
SPC Lipo Power
Here are a few pics of mine. No mods yet, not even ran yet. But it's all mine
Pic of my finished pede
Got some nice pics in the snow. Using ProLine SandPaw and they are excellent in the snow, asome traction.
Last edited by CoolKD; 03-22-2013 at 10:06 AM.
Stampede 4x4 VXL Pro-Line Trencher
Here's my miniT with my 1:1
Freshly painted pics:
Stampede 4x4 VXL
Well, sorry for this, I deleted my pics...
Here we go again:
Ready for 65mph!!!
(won't delete pic this time)
This is some pede love, had too many of them already.
Last edited by RC-Fan; 04-25-2013 at 04:19 PM.
This is my collection so far minus green and orange rally's, red spartan, hpi baja 5bss, erevo 6x6, and my
This is my Rustler 4x4 made from a stampede 4x4 and shows my Rc car carring bag.
Last edited by foulkjonathon; 04-30-2013 at 12:17 PM.
This is how I mount my rustler body on my stampede 4x4 to make it have a super low body. And some upgrades I bought and installed. This also show how i put a 5000mah lipo in a stampede 4x4 battery tray. i had to motify the tray and remove the factory battery hold down.
Last edited by foulkjonathon; 04-30-2013 at 12:16 PM.
As it came in the box:
Last edited by dgudenau; 05-26-2013 at 12:26 AM.
Anza Slash VXL
Took my pede out to some huge dirthills (or wathever it was, cant describe it, sorry but Im from the Netherlands) And had a lot of fun
Only a roller spec at this stage, but here it is with its newly painted body.
The build thread is here:
Last edited by PK Blade; 07-04-2013 at 09:25 PM.
Here are some pics of my pede 4x4
Running on 3s.
Big Air Don't Care