Page 4 of 4 FirstFirst ... 234
Results 121 to 157 of 157
  1. #121
    RC Qualifier
    Join Date
    Dec 2012
    Location
    Sacramento, CA
    Posts
    593
    motor : Titan 775
    ESC : EVX 2 with LVC
    Steering: complete aluminum set up with a Hitec 7950TG high torque servo (single servo setup)
    Body Armor: full T-Bone skid plate setup ( A-arms and body skids)
    Spur/pinion : 68/12
    Batts : (2) SPC 2s lipos in series(6500)
    speeds : 18 mph max
    Run time : 1 hr 15 mins crawling with little bashing
    WHEELS/TIRES : Pro-line F11 w Mudslingers
    BODY : Stock with Pro-line scale accessories and Pro-line 73' Ford Bronco
    Suspension : Stock long travel w/ 80wt oil
    Radio sys : Traxxas TQi 2.4 gHz
    # of lights : 18 total: 2 under carriage for night crawling.















    Sent from my iPhone using Tapatalk - now Free

  2. #122
    RC Turnbuckle Jr. noir 522's Avatar
    Join Date
    Sep 2009
    Posts
    3,318
    name : Project 005mot : SumVee HDE
    motor : Tekin truggy motor 1700 kv
    ESC : Tekin RX8 encased in aluminum waterproof box
    Steering: custom 4WS system, powered by 611 oz torque Hitec 79800th in the front and a 611oz torque 7990th in the rear
    Body Armor: custome N-bone skid plate . Longer due to the longer chassis and shaped to protect the rear steering system
    Spur/pinion : 72/8
    Batts : (2) SPC 2s lipos in series(9000)
    speeds : 17 mph max in high gear , about 7 in low gear
    Run time : 1 hr +
    WHEELS/TIRES : MULTIPLE, all mounted on 23mm rims ( mudslingers, losi claws, trenchers, mashers, etc etc)
    BODY : proline hummer H2 SUT with custom rack
    Suspension : Stock long travel
    Radio sys : Spektrum DX4S
    # of lights: stock plus 4 in light bar

    Bolt ons : Led light bar, 23mm hexes, aluminum servo guards, aluminum diffs and hardened steel gears, aluminum esc enclosure, Castle BEC to handle the servos,

    Custom : everything else. custom rook rack, added body fenders, custom rear steering system, Custom skid plate to protect the rear steering system, chassis cut to allow the 72t emaxx gear motor sacers to allow the 8t pinion gear,


    http://traxxas.com/forums/showthread...EERING-(-4WS-)











    Last edited by noir 522; 11-25-2013 at 01:21 PM.
    MAN, Use Common Sense.
    Outside? THERE IS NO BOX !

  3. #123
    RC Qualifier
    Join Date
    Apr 2013
    Location
    Ontario, Canada
    Posts
    778
    Codename: Zeus

    Just completed last month by putting in the new Tekin power system and New Savox Servo , Over $2000 invested in it. 100% Mechanical condition, only a few scratches on the bumpers/skids and body. This took almost a year to complete, The ENTIRE truck has been ripped 100% apart , cleaned, lubed and re-assembled. I have shimmed diff`s, very well. They were filled with 120k diff fluid and then the bulkheads were filled with the hot glue mod to re-enforce the bulkhead. Its HEAVILY Modded with most available upgrades plus some that are not even on the market yet like the LEM aluminum axles It has a Tekin RX8/T8i Gen2 1550kv power system(which has been waterproofed) with a Savox metal gear servo(which has been waterproofed) . The motor, ESC and servo have all been water-resistant tested, There is an adjustable LVA mounted on the chassis for added protection. The body is attached by a Velcro mod on the battery doors , much easier/better in my opinion. But the posts and twist-tops are still there and functional as well. Kind of a double secure system. The stock TQi 2.4GHz radio system (tx/rx) are also included. The body posts have been lowered. The battery vents have been modded to allow for the battery cables to be routed through them. The truck comes with Pro-line Trencher 40 Series tires on Tech 5 Wheels, They have been taped to reduce ballooning. They also have been balanced, this is visible by some small amounts of modeling clay inserted into the inner rim.

    10 months ago It started as a brand new Traxxas Summit.

    Then added the following:
    -Tekin RX8/T8i 1550kv Power System (waterproofed)
    -Savox 1230-SG Metal Gear Steering Servo (500oz@6v) (waterproofed)
    -Integy Aluminum Pillow Ball Caps
    -Traxxas Double Orange Springs All-round
    -Integy Aluminum Servo Horn
    -Integy Aluminum Servo Saver Set
    -Tbone Chassis Skid
    -Dusty Motors Shroud Cover
    -Roof light bar
    -Integy LVA
    -RPM Front and Rear Bumper Mounts
    -Ham Sandwich Mod
    -HD Slipper clutch
    -GH Aluminum Servo Guards
    -GH Aluminum Center Skid
    -Traxxas Servo Plate
    -Traxxas 65t spur gear
    -TQi 2.4GHZ TX/RX
    -RRP 11t Pinion
    -T Bone Racing A-Arm skids
    -Leading Edge Machining Aluminum Diff Cups
    -Traxxas Steel Center CVD`s
    -LEM Hardened Differential Spider Gears
    -Trenchers on Tech 5 Wheels (Taped)
    - Pro-line Body Secure-loc System


    CLICK HERE FOR THE SLIDE SHOW!!!!!!!!!!!










    To SUMMIT up, its my coolest RC.

  4. #124
    RC Enthusiast
    Join Date
    Aug 2012
    Location
    windsor ontario
    Posts
    43
    my summit : castle creations 2200kv system , geared 18/68 esc in custom aluminum oil filled box , junfac ressi shocks on rear , dyed chassis, chassis braces hardened rear/front diffs ,home ade aluminum skid plates ,slash 2wd front bumper , axial really narrow rims , 40 series rock crushers studded oh and two completely broken bulkheads thatt are barley holding together ,, srry for crappy pics lol



  5. #125
    RC Turnbuckle Jr. noir 522's Avatar
    Join Date
    Sep 2009
    Posts
    3,318
    Do not wither with the passage of time. Allow eternity to regard your name forever. Cast your summit in the stone scribing of history.

    Post up ye fools
    Last edited by noir 522; 03-14-2014 at 12:53 AM.
    MAN, Use Common Sense.
    Outside? THERE IS NO BOX !

  6. #126
    RC Qualifier
    Join Date
    Oct 2013
    Location
    Finksburg MD
    Posts
    283
    Name : King Summit
    Motor : Castle Creations 1717 1580kv
    ESC : Castle Creations Mamba Monster
    Spur/pinion : Robinson racing gen 3 65t spur -Robinson racing 13t pinion
    Batts :two 5500mah 3s=22.2v lipos
    Speeds : 30+or-
    Run time : Long enough
    WHEELS/TIRES : painted CEN GENESIS 7.7 wheels-tires
    BODY : Stock traxxas summit body
    Suspension : 120 long travel.4double orange springs-front and back
    Radio sys : Traxxas TQ 4 channel
    # of lights : 8 super bright 10mm leds moded with stand alone 6v bec and gws esc,controlled by 4th channel on radio.
    Upgrades Rpm arms,rpm knuckles with oversized bearings,mip drive shafts,hot racing Cnc motor mount,hot racing steering assembly,hot racing front and rear shock mounts,American CNC Machining 23mm wheel adapters,Dual Hitec servos,traxxas center driveshafts,blue printed locking diffs "shimmed tolerance to tenths" ,transmission converted to single speed.



    Last edited by Cky; 03-14-2014 at 03:30 AM.

  7. #127
    RC Champion soundmaster's Avatar
    Join Date
    Jan 2012
    Posts
    2,853
    Quote Originally Posted by Cky View Post
    Name : King Summit
    Motor : Castle Creations 1717 1580kv
    ESC : Castle Creations Mamba Monster
    Spur/pinion : Robinson racing gen 3 65t spur -Robinson racing 13t pinion
    Batts :two 5500mah 3s=22.2v lipos
    Speeds : 30+or-
    Run time : Long enough
    WHEELS/TIRES : painted CEN GENESIS 7.7 wheels-tires
    BODY : Stock traxxas summit body
    Suspension : 120 long travel.4double orange springs-front and back
    Radio sys : Traxxas TQ 4 channel
    # of lights : 8 super bright 10mm leds moded with stand alone 6v bec and gws esc,controlled by 4th channel on radio.
    Upgrades Rpm arms,rpm knuckles with oversized bearings,mip drive shafts,hot racing Cnc motor mount,hot racing steering assembly,hot racing front and rear shock mounts,American CNC Machining 23mm wheel adapters,Dual Hitec servos,traxxas center driveshafts,blue printed locking diffs "shimmed tolerance to tenths" ,transmission converted to single speed.



    Why did you remove the 2 speed transmission? Probably not necessary with the 1717 no?

    And how are the diffs holding up with such a powerful monster motor?
    Last edited by soundmaster; 03-14-2014 at 06:31 AM.

  8. #128
    RC Qualifier
    Join Date
    Oct 2013
    Location
    Finksburg MD
    Posts
    283
    The first gear for crawling could not withstand the power form the motor,by eliminating I am using just the main second gear gear thats a lot,a lot stronger.plus having a spare channel to control led lights is awesome.alazingly the diffs are very good i have been bashing with them for over a year and "knock on wood" they are still holding up.

  9. #129
    RC Competitor
    Join Date
    Jan 2007
    Posts
    80
    Here is my Summit I have owned for 2+ yrs now. Love this beast!!!! A lot of nice trucks on here guys, nice to see Listed below are my specs and pics, enjoy

    Name: Fred
    Body: Stock, HPI 79 F250 (not even painted yet)
    Wheels/tires: Some seriously beat stock Canyons that have been repaired to many times, lol Got some Proline TrencherX on black desperatos 1/2" offset, Proline Rock Rage on F11's 1/2" offset (currently on backorder)
    Chassis: Stock but dyed all black with RIT
    Suspension: Integy adjustable from 90-120 travel, 25lb springs front and rear, stock links, 40w oil
    Steering: Stock for now
    Driveshafts: Traxxas steel center shafts, MIP front/rear (should be arriving anyday)
    Tranny: Stock
    Servos: Stock
    ESC/motor: Stock EVX2 w/lvd and 14.4v Dewalt (installed currently), Castle Sidewinder 8th waterproof esc/2200kv system (not installed yet), Novak Diablo sensored esc/550 2pole system (not installed yet)
    Radio: Stock 2.4ghz not the fancy newer one
    Batteries: Traxxas 5800mah 25c x4, GH 5000mah 30c x2
    Diffs: Stock for now, soon to be LEM or HR? 50,000 weight oil
    Gearing: 15/68 with Dewalt, haven't run the other systems yet to know yet
    Everything else stock... haha for now












  10. #130
    RC Champion soundmaster's Avatar
    Join Date
    Jan 2012
    Posts
    2,853
    Nice color dude

  11. #131
    RC Qualifier
    Join Date
    Sep 2013
    Location
    Maysville,Ky. USA
    Posts
    774
    Overkill
    Motor :Castle Creations 1/5 scale 780kv 2028 (about 3 pounds worth of motor)
    Esc : Castle Creations XL2 not waterproof yet
    Batteries : 8s (2-4s) in series 5000 mah 65/130c , 8 gauge wires with 8mm bullets
    Bec : Castle Creations Pro Bec - waterproofed
    Slipper clutch : Hot Racing HD slipper
    Steering : dual Savox Sg1230sg - waterproofed
    Receiver box : aka(the rats nest) bigger and some what waterproof
    Suspension : Kershaw Design A Arm Extension Kit
    Springs : Honda 70 atv outer valve springs in rear front springs revo extended springs with honda 70 inner valve springs
    Chassis : Kershaw Design aluminum chassis stretched 2 inches by me
    Drive shafts: plastic but extended, Waiting on LEM for aluminum ones
    Tires : RC4WD Super Swampers with smaller lugs removed , mounted on dual stock Summit rims
    Body : New Bright Fordf150 Raptor hard body with a few lights
    Gearing ; 18 tooth pinion 72 spur with added gear reduction (top speed in first gear 4.4 mph)(2 gear top speed 12.3 mph)
    Diffs: stock front - rear diff with heat treated spiders by me with JB weld epoxy. 2 LEM alum diff cups waiting on a full set of hardened gears.
    Tx : stock TQI 2.4
    Price tag : I won't even try but cheaper then i had planned.
    Homemade roof rack for holding spare batts, homemade rear hitch and a cool tool box
    Future plans : heavy duty winch and snow plow and a Tx to run the new stuff , LEM aluminum diff cases

    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
    OVERKILL,10Sum,16Sum,Xo1,MMSlas,44Stamp,Rus,16Ral

  12. #132
    RC Competitor
    Join Date
    Jan 2007
    Posts
    80
    Overkill... that truck is freakin nutz!!!! LOVE IT

  13. #133
    RC Enthusiast
    Join Date
    Sep 2013
    Posts
    23
    [QUOTE=Sactown_Summit;5579803]motor : Titan 775
    ESC : EVX 2 with LVC
    Steering: complete aluminum set up with a Hitec 7950TG high torque servo (single servo setup)
    Body Armor: full T-Bone skid plate setup ( A-arms and body skids)
    Spur/pinion : 68/12
    Batts : (2) SPC 2s lipos in series(6500)
    speeds : 18 mph max
    Run time : 1 hr 15 mins crawling with little bashing
    WHEELS/TIRES : Pro-line F11 w Mudslingers
    BODY : Stock with Pro-line scale accessories and Pro-line 73' Ford Bronco
    Suspension : Stock long travel w/ 80wt oil
    Radio sys : Traxxas TQi 2.4 gHz
    # of lights : 18 total: 2 under carriage for night crawling.















    Do thoose wheels fit perfectly in the Summit? Don´t they rub?

  14. #134
    RC Qualifier
    Join Date
    Dec 2012
    Location
    Newcastle, Australia
    Posts
    969
    Name: The Big Hoss
    Motor: CC1515 2200kv (trial run) or DeWalt 14.4v
    ESC: Mamba Monster 2
    Spur/pinion: 18/68
    Batteries: 2x 2S 7600 or 6000mah 40C in series- 4S
    Speeds: Speed Calculator says 40mph- Don't know for sure
    Run time: Guessing 30-40 minutes
    Wheels/Tyres: RC4WD Mudslingers on Traxxas Geode 3.8 rims
    Body: Green Stock Summit with latest graphics, lowered
    Suspension: Stock long travel with 60wt fluid, just under 6" of ground clearance
    Steering: Single Servo Setup- MG959 30kg Servo, Aluminium horn, Hot Racing servo saver
    Radio sys: TQi 2.4ghz 5 channel
    # of lights: Stock- 10
    All Modifications: ESC, Motor, Tyres, Servo, Servo Saver, Paint here and there, Dechromed Rims, Aluminium cover plate for spare servo hole, body lowered
    Pictures:


    Slugs are just naturally aspirated snails

  15. #135
    RC Turnbuckle Jr. noir 522's Avatar
    Join Date
    Sep 2009
    Posts
    3,318
    You guys ever play Diablio 1 on Playstation?
    That butcher is allways looking for

    FRESH MEAT




    ALSO IF YOU GUYS HAVE A BUILD THREAD THEN POST A LINK TO IT SO WE CAN CHECK FOR MORE DETAILS AND UPGRADES
    Last edited by noir 522; 08-25-2014 at 03:42 PM.
    MAN, Use Common Sense.
    Outside? THERE IS NO BOX !

  16. #136
    RC Qualifier
    Join Date
    Aug 2014
    Posts
    346
    Can u name all u bought bought to make your back wheels turn? I want to buy that to that is cool

  17. #137
    RC Qualifier
    Join Date
    Aug 2014
    Posts
    346
    How did u get your summit 1inch and a half higher?

  18. #138
    RC Racer
    Join Date
    Aug 2014
    Location
    Wisconsin
    Posts
    134
    Quote Originally Posted by traxxasbrothers View Post
    Thats quite nice.

    Specs of mine:

    Nothing
    its on my WISHLIST =)
    Same, only need about 20 more bucks.
    1/10 Summit

  19. #139
    RC Qualifier
    Join Date
    Dec 2012
    Location
    Newcastle, Australia
    Posts
    969
    Quote Originally Posted by Billgates1234 View Post
    How did u get your summit 1inch and a half higher?
    Taller tyres and stiffer springs so it doesn't sag.
    Slugs are just naturally aspirated snails

  20. #140
    RC Competitor
    Join Date
    Sep 2013
    Location
    France
    Posts
    69
    Hi

    Name: The thing
    Motor: Dewalt 18v
    ESC: MMMv3
    Spur/pinion: 18/65
    Batteries: 2x 3S 5000
    Speeds: Don't know but for now it's enough
    Run time: enough (never look at it..)
    Wheels/Tires: most of the time Proline Trencher 40 on Axial oversized, but I got RC4WD xlight 40 on Axial 40 bead-lock (I cut it) and slingshot on proline F11
    Body: Proline baja bug
    Suspension: Stock long travel with stock oil
    Steering: Single Servo Setup w/ Hitec hs7950th (on 7v w/ a CC bec), Aluminium horn Racer Edge, Proline steering arm
    Radio sys: Futaba 4PL
    # of lights: 10 but need to instal a light bar
    Custom: LEM diff cup on the rear, lowered the body w/ Erevo body post and bumper mount, hide all the cables, Hitec micro servo, RRP slipper, black chassis, desanodized chassis brace, protection for the rear axle...

    Post of the build













    Last edited by The Dude; 08-28-2014 at 11:48 AM.

  21. #141
    RC Competitor
    Join Date
    Aug 2010
    Location
    CA
    Posts
    61
    My Summit
    Motor/ESC: XO-1 Mamba monster with 1717 motor.
    Modded motor mount (not made by me) to fit the 1717 motor and increase battery size.
    Wheels/Tires: Imex 17mm wheels with Jumbo Kong tires.
    Summit body with metallic red paint.
    Gearing: 68t spur with 26t pinion
    I build this from scratch and saved some money by not buying the summit transmitter/receiver and shifting servos. Got some aluminum wires to lock the transmission and diffs (doesn't look nice but temporary for now until I have more time to tinker with it). Cut the top part of chassis for extra space for larger lipos. Last thing to do is to make a chassis brace similar to Tbone racing to increase chassis strength since the top part was cut off. So far so good.

    [/URL]

    [/URL]

    [/URL]

    [/URL]
    Summit Dual 700HO/Tekin/MM2
    Emaxx 1717
    XO-1 GT

  22. #142
    RC poster
    Join Date
    Apr 2015
    Posts
    11
    Last edited by Carnie093; 05-28-2015 at 05:50 AM.

  23. #143
    RC Qualifier
    Join Date
    Jul 2014
    Posts
    325
    I just got spc's I love them https://youtu.be/0J1uQl4Qot0

  24. #144
    RC Qualifier
    Join Date
    Jul 2014
    Posts
    325
    My summit exploring with mudslingers and dual spc lipos https://youtu.be/W-v-d4KBh7s

  25. #145
    RC Enthusiast
    Join Date
    Jun 2013
    Location
    Birmingham, Alabama
    Posts
    39
    motor : Tekin 4038 2000kv truggy motor
    ESC : Tekin RX8 waterproofed with conformal coating and plastidip, or 14.4v Dewalt with EVX-2
    Steering: Single Servo setup with Savox 1230sg 500oz Servo, aluminum servo arm
    Spur/pinion : 17/68
    Batts : (2) SPC 2s 8200mah lipos in series
    speeds : 15ish in low, 32ish in high
    Run time : 1&1/2-2 hours of mixed bashing and crawling
    WHEELS/TIRES : Proline trenchers 40 series on Axial Narrow Rocksters
    BODY : Stock green body lowered with RPM revo bumper mounts.
    Suspension : Stock Long travel. Black dyed springs and rockers.
    Radio: stock 2.4ghz system


    Bolt ons : Led light bar, T-bone racing skids, traxxas chassis brace (black), rpm bumper mounts, HD slipper clutch.

    Custom : No slop hex mod using threaded inserts.

    http://s1297.photobucket.com/user/jk...tml?sort=3&o=1

    http://s1297.photobucket.com/user/jk...tml?sort=3&o=2
    Summit all the way!

  26. #146
    RC Enthusiast
    Join Date
    Jun 2013
    Location
    Birmingham, Alabama
    Posts
    39


    Summit all the way!

  27. #147
    RC poster
    Join Date
    Jul 2015
    Posts
    8
    Built mine from a roller on ebay.

    Proline F-11 wheels with Super Swampers.
    Hitec RCD HS-7950TH digital servo
    ST racing single servo arm
    Mamba Monster 2 esc
    ******* 1900kv brushless motor
    LEM Aluminum diff cups
    Proline Militia body
    Tactic 3 channel TTX300
    Integy green aluminum front bulk head
    RPM front A arms

    Last edited by EchoplexSE; 07-07-2015 at 11:27 AM.

  28. #148
    RC Champion soundmaster's Avatar
    Join Date
    Jan 2012
    Posts
    2,853
    Quote Originally Posted by EchoplexSE View Post
    Built mine from a roller on ebay.

    Proline F-11 wheels with Super Swampers.
    Hitec RCD HS-7950TH digital servo
    ST racing single servo arm
    Mamba Monster 2 esc
    ******* 1900kv brushless motor
    LEM Aluminum diff cups
    Proline Militia body
    Tactic 3 channel TTX300
    Integy green aluminum front bulk head
    RPM front A arms

    Looks good. Could you post a pic without the body? Thx.
    Last edited by soundmaster; 07-07-2015 at 12:07 PM.

  29. #149
    RC poster
    Join Date
    Feb 2016
    Location
    Fulton, MO
    Posts
    18
    bro420, where u find rocket arm? it can adj from p1 to p3 and LT?

  30. #150
    RC Qualifier
    Join Date
    Oct 2013
    Location
    Finksburg MD
    Posts
    283
    Quote Originally Posted by A2Zerevo View Post
    bro420, where u find rocket arm? it can adj from p1 to p3 and LT?
    Integy use to make them for revos.

  31. #151
    RC Qualifier
    Join Date
    Oct 2012
    Location
    Michigan
    Posts
    284
    Bryguy81, that is a beast! Have fun with the build.

  32. #152
    RC Champion
    Join Date
    Apr 2011
    Location
    waterloo .on.canada
    Posts
    2,288
    original purchase date dec, 11, 2010.

    original drive shafts, original esc, radio.

    stainless steel screws, 2.5mm drive
    aluminum rocker arm posts
    strc red aluminum axle carriers
    truck monster.de aluminum differential cups.
    red bulk head plates

    pretty much have changed out everything due to wear, sept for the drive shafts, tower mounts, tranny. other then that it takes the lick'en and keeps ticking. most dependable rc.

    just got done today building a new set of strc hubs, re doing the tie rods. and am going to be paint up a new summit body in the next couple of weeks. and will try to do some detailing to try and make this like something that should come from factory. I'm doing coarsa grey backed with white. and will be adding in some black high lights on the hood and roof rack
    summit /mustang /stampede-2s spc lipo

  33. #153
    RC Enthusiast
    Join Date
    Feb 2013
    Location
    303
    Posts
    47
    Some awesome trucks in here!! My summit is still in the build process but I couldn't wait to get it up and running so I could go on a trail ride! Currently it needs locking diffs, axles and servos to be complete. Basically a LT revo with low gear lol. Still is a blast to drive without the locking diffs.
    150 amp 6s esc
    2650 kv can't remember brand
    revo diffs
    center and axle cvds
    solar d772 x2

    Here's a couple pics from the first ride:




    3 minute video playing around in the backyard
    http://vid1214.photobucket.com/album...psgw8p2mle.mp4
    Summit Hauler
    4ws SCX10
    Mischief-Maker

  34. #154
    RC Enthusiast
    Join Date
    Feb 2013
    Location
    303
    Posts
    47
    Changed the hauler up a bit:
    Swapped 150 amp esc to mamba x
    Swapped motor from 2650kv sensorless to SMC 1900kv sensored
    Up'd voltage from 2s to 3s kept same gearing 14/68


    Some scale accessories coming next week:
    2" proline light bar for hood
    roof rack
    gas can
    shovel
    jack
    faux winch

    Summit Hauler
    4ws SCX10
    Mischief-Maker

  35. #155
    RC poster
    Join Date
    Jun 2016
    Posts
    1
    My Summit:

    ~Name: Super Summit
    ~Motor(s): 2 Castle Creations
    1/8 Scale 2650kv
    ~ESC(s): 2 Castle Creations 1/8
    Scale Mamba Monster X
    *(I have the Kershaw Designs 1/10 Scale Traxxas Summit Dual Motor Mount to have dual motors)*
    ~Spur/Pinion: 22/46 Hardened
    Steel Gears
    ~Battery(s): 2 Floureon 3S 35C
    5500 mAH batteries*(One
    battery per ESC)*
    ~Speed: To Be Determined- My
    GPS died when my X0-1 hit a
    mailbox at 113 MPH during a
    speed run ( It was quite the
    crash! Unfortunately my X0-1
    was totaled)
    ~Run Time: Aprox. 35 mins with
    a mixture of crawling, bashing,
    and trailing
    ~Rims: Huntsman Spider 40
    Series 3.8 Beadlock
    Aluminum Rim
    ~Tires: Pit Bull Rock Beast XL
    3.8 Tires
    ~LED Lights: Stock LED's+
    Assortment of Ebay Light Bars
    and MyTrickRC lights
    Body: Pro-Line 2014 Chevrolet
    Silverado

    And MUCH more... but TOO much to list!!

    Sent from my SM-G920V using Tapatalk

  36. #156
    RC Competitor
    Join Date
    Sep 2013
    Location
    France
    Posts
    69
    need a vid !! or some pics
    "souvent fauché toujours marteau !"

  37. #157
    Marshal ksb51rl's Avatar
    Join Date
    Nov 2006
    Location
    Northern NJ
    Posts
    18,789
    Quote Originally Posted by The Dude View Post
    need a vid !! or some pics
    I'd settle for the truth.
    Alt-248 on the number pad = °

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •