Hey it's about time we had a video thread of our own on the E-maxx forum... So here goes nothin'
Welcome to the Official Traxxas E-Maxx Video Gallery. This is a place where you can post your videos to show off your truck and/or your driving skills. Please read the following guide lines:
- This thread is for videos of your Traxxas E-maxxes only. If you have a question for one of the people posting a video, please send them an e-mail or a PM so the thread does not get filled up with people talking. This is a place for videos not people asking what body or tires someone is using.
- When you post a video, it would be greatly appreciated of you would post a detailed summery of what hop-ups you had on your vehicle at the time the video was taken.
- Anything off topic will be deleted.
- Any dead links will be deleted.
But most importantly have fun.
Last edited by ksb51rl; 06-02-2011 at 03:18 PM.
MMM 2x3s medusa 70-2300 | MMM 2sx3s 1515 1y
MMM 2x3s medusa 70-2300 | MMM 2sx3s 1515 1y
BL E-Maxx with snowchains and as an sledge dog
E-Maxx 3905 with EZrun 150A/CC2200kv and 4s
700HO V2 OverDrive 2 Speed kit vs 80A EZRun 3674SL Brushless Shootout #1 on grass
HD Link: http://www.youtube.com/watch?v=-xknfLoFTaA
700HO V2 OverDrive 2 Speed kit vs 80A EZRun 3674SL Brushless Shootout #2 on concrete
HD Link: http://www.youtube.com/watch?v=X05Dv7cP0GU
p.s. can someone give me the code needed to embed!!! lol
Last edited by syncronized77; 04-13-2010 at 11:04 AM.
3905 EZRun 80a: 65.3km/h
3905 700HO: 66.9km/h
Here's the video of my son having a red neck wagon ride Going about half throttle.
Novak 7.5 Motor, 2 5000 Lipos, 2.4 GHz 4 channel Traxxas High Output Radio- I love the new traxxas Radio. It fixed all my Novak Motor Problems.
Last edited by ddubbua; 04-21-2010 at 02:03 PM.
Finally made a short video (1m 30s) showing off my E-Maxx driving around my driveway. Not exciting or ground breaking by any means but it does show off speed potential of a LiPo powered 775.
(PM me if there are issues with this video playing, I haven't used this before and I don't like Youtube so I'm trying to avoid it.)
- Traxxas Link 2.4 Ghz radio system with TQ3 transmitter
- Traxxas two-speed conversion with wide ratio gears installed
- Traxxas maroon dyed chassis and red Bad Horsie shock socks
- Traxxas Big Bores with RC Raven progressive springs and 40wt oil
- Traxxas Titan 775, geared 21/68 and mounted on a single motor plate
- 2x 2s Kershaw Designs 20C 5000 mAh LiPo
- Kershaw Designs 2s Smartstop LVC Cutoff
- Kershaw Designs Hobbywing 700-sized motor heatsink with fan
- Proline MOAB tires mounted on Axial Oversized Spoke beadlock wheels
- RPM True-Tracks, axle carriers, rear bumper, wear plates
- Great Assembly aluminum bulkheads and braces
E-Maxx 3905 - Rustler 3707 - Slash 5805
My buddy and I just got into the R/C hobby. This is my first REAL R/C (the E-Maxx) and it's been about 6 years since my friend had one (He has the T-maxx 3.3) we decided to start this series to be funny and just show how fun the sport can be and how much we love Traxxas products. Hope I don't get in trouble because there is a T-maxx in the video as well. If people enjoy it we'll continue the episodes and try to make them better each time.
Both vehicles are stock.
Last edited by Buferd; 05-16-2010 at 02:35 PM.
This is my son with his stock 3905 about 10 minutes before one of his venom 8.4v packs started to melt..... too many rev to forward wheelies.
I'm racing against him with my Summit but for some reason his racing skills weren't displayed in this video.
New member, long time r/c fanatic...
Here is a 10 minute video in HiDef I produced of my son (age 8) doing some rock and water running at our cottage in Northern Ontario.
The truck is basically stock, but has had 6.3 tires and wheels, 12 tooth pinion, and thicker diff fluid installed.
After the rock work, I noticed that the plastic skid plates and bumpers were getting shredded, so I have ordered aluminum skids and bumpers all around.
Hope you like it!
Last edited by stu123; 08-11-2010 at 01:41 PM.
running the 3905 trying to figure out the best mounting spots.
replaced the sound due to the wind noise.
Last edited by marlon3; 12-24-2010 at 11:14 PM.
Hi guys !
Here you are some videos for you :
This is my channel on youtube.
Just watch the lasts 12 videos
The 2 E-maxx are hopped up with
- MMM 2650 KV
- EZrun 150A & 2000Kv Xerun 4274 brushless
Emaxx_3905 EZrun_80A_4s_2350KV Motor
I'm new E-Maxx Driver :-) and below is my first fpv run.
I'm a brand new member of this Community and I wish to share with you my unlimited passion for this amazing Hobby.
Here is just a short video of my last creation: a trial track made in occasion of the Hobby Model Expo Spring Edition in Novegro (Milan - Italy) on february the 26-27th.
The track has been realized just in 5 hours with three friends of mine. All the materials were found in a stock of the Fair that hosted the event.
The Emaxx I am driving trough the obstacles is a brushed 3903 with stock motors and a MMM ESC and a selfmade 4WS carbonfiber sytem (single Hitec HS7955TG Digital servo 333 Oz./in. on back steering system and a couple of Hitec HS 5645MG Digital servo 168 Oz./in. on front steering), the radio is a Futaba 3PK with Spektrum module and two mixing programs to manage the 2WS/4WS system)
Enjoy and rate/comment, please!!
This is my 3906 twin. I keep breaking steel axles it twists them or breaks the inside pins. It has good power and torque but I'm going back to one motor.
This is my latest shots of my E-Maxx.
Hi there this is the first run of the new motor installed. 3609 de-maxx 2s lipo.
sound may be quiet so turn up that volume.before you press play.
Nothin' like a 4 on the floor and a V8
E Maxx (3906) / ******* 2560kv / Leopard SC8 ESC / 4s 20c 5000mah
with Castle Creations SCT 2400kv system / 4s 20c 5000mah
The pooch getting in some exercise before bed time.
In order to learn how to use my computers video software I borrowed a camera and took out the E-Maxx for it's video debut. The still photos are from my Son Corey's camera taken at Christmas time before I started doing any serious changes to it. I thought the video quality would be better than it is, as the camera is a 10 mega pixel, but I found out that is just for photos, not video. So don't hate on the quality, I know it's crappy. My main goal was to learn more about how to edit and time the music.
Since I don't have a GoPro with all the cool attachments (yet, it's top on my X-Mas wishlist), I came up with an idea to use me flexible tripod. Here is how all the video was taken.
Let me know what you think.
Μy E-Maxx running on a really rough terrain somewhere in Greece. Watch how the Traxxas progressive springs absorb the anomalies of the ground and keep the body so steady as if it is floating to the air!!!
So not much of a video, but it's my first attempt at making one and at jumping.
Last edited by J-Maxx 28; 05-24-2012 at 10:49 PM.