Results 1 to 31 of 31
  1. #1
    RC Racer
    Join Date
    Oct 2009
    Location
    Cali
    Posts
    119

    Got a few pic's of my LCG chassis...........

    and am just waiting for my other order to finish it up..
    I sealed the diff and will be adding the diff oil as soon as it gets here.
    Should be ready for next week's race. I bet it's gonna handle more better...he he
    The chassis was missing a few parts and one hole was not countersunk but I made a missing stand part and countersunk the hole so as to get this thing done...
    The GE trans case had a problem or two also.. The parts did not fit up to well so I had to put them on the mill. It's a cast part and tolerances are bad.
    The bottom screw holes are not tapped for enoug for two of the screws to fit so you have to shorten them to screw in the case?? Not perfect luck so far on both these items.... Ons thing is for sure thou... It is Sweet after the hassle.







  2. #2
    RC Turnbuckle Jr. harry697's Avatar
    Join Date
    Jan 2008
    Location
    South Jersey
    Posts
    8,352
    Nice! Which chassis is that?


    Is it just me,or are these aftermarket LCG Slash chassis' basically an extended Rustler?

  3. #3
    RC Qualifier
    Join Date
    May 2009
    Location
    Powell, Ohio
    Posts
    829
    Quote Originally Posted by harry697
    Nice! Which chassis is that?


    Is it just me,or are these aftermarket LCG Slash chassis' basically an extended Rustler?
    Yeah, I noticed that aswell.
    Free all none violent drug offenders!

  4. #4
    RC Racer
    Join Date
    Oct 2009
    Location
    Cali
    Posts
    119
    It's a Xtreme Racing chassis and it says it can be used for a Rustler but it will extend it. I'll see what happens when I get it all together.

  5. #5
    RC Qualifier
    Join Date
    Aug 2008
    Posts
    412
    Quote Originally Posted by harry697
    Nice! Which chassis is that?


    Is it just me,or are these aftermarket LCG Slash chassis' basically an extended Rustler?

    A Slash is an extended Rampede.
    Built Ford tuff!

  6. #6
    RC Champion
    Join Date
    Apr 2005
    Location
    the land of GO FAST
    Posts
    1,512
    the slash is a goofy mix anyways nice chassis!
    RC enthusiast!

  7. #7
    RC Champion
    Join Date
    Oct 2007
    Posts
    1,771
    nice rustler chassis. sorry i haven't go a chance to read the posts. but shouldn't this be in the rustler forum.
    i know i know it is a slash chassis.
    either way. it looks cool

  8. #8
    RC Competitor
    Join Date
    Mar 2009
    Location
    Rosarito, Mx
    Posts
    61
    have to say, i saw this chassis on other pages and it looks very good, it's a little rustler and the rest is slash, but if you search photos, the top plate, the reciever mount , all slash, this chassis has slash written all over it!!!, very good chassis, I changed my mind from the aluminum xtreme chassis to this, definetly worth the money!!!, search it up at www.amainhobbies.com, its there
    I'm your huckleberry.

  9. #9
    RC Racer
    Join Date
    Sep 2009
    Location
    Bothell, WA
    Posts
    164

    Comparison

    How does this compare to the GorillaMAX?
    Traxxas Slice
    Spektrum DX3e
    EZRun 60A@4000kV

  10. #10
    RC Racer
    Join Date
    Oct 2009
    Location
    Cali
    Posts
    119
    I could only find two low cg chassis and they wanted to much shipping for the one so I went with Xtreme but it takes a bit of work to make it work..
    I also emailed Xtreme to repalce the parts that didn't come with it.. no word as of yet. Hope to race it this coming weekend and can see how she handles now.. Should work good.

  11. #11
    RC Turnbuckle Jr. harry697's Avatar
    Join Date
    Jan 2008
    Location
    South Jersey
    Posts
    8,352
    Quote Originally Posted by colormegone
    I could only find two low cg chassis and they wanted to much shipping for the one so I went with Xtreme but it takes a bit of work to make it work..
    I also emailed Xtreme to repalce the parts that didn't come with it.. no word as of yet. Hope to race it this coming weekend and can see how she handles now.. Should work good.

    Cool.Keep us posted on the outcome.Very interested to hear how their CS is.

  12. #12
    RC Turnbuckle Jr. rag6's Avatar
    Join Date
    Mar 2008
    Location
    Accepting requests for bashing at GREENWOOD BASHPLEX in Pittsburgh PA!! Check the thread in the track buddy forum and reply there or pm
    Posts
    13,617
    Who makes the trans case? Idk who GE is?
    Ya can't polish fertilizer...

  13. #13
    RC Racer
    Join Date
    Oct 2009
    Location
    Cali
    Posts
    119
    Golden Horizon made the trans case.

  14. #14
    RC Champion
    Join Date
    Nov 2008
    Location
    The left coast
    Posts
    2,892
    That is a cool project you've got yourself there. That chassis is smexy.
    The biggest thing i've broken: My wallet.

  15. #15
    RC Competitor
    Join Date
    Mar 2009
    Location
    Rosarito, Mx
    Posts
    61
    integy came with a LCG chassis, no its not those heavy pieces of aluminum, its something like the xtreme and has more slash feel than the xtreme chassis, to me, it looks strong and better, theres 2 versions, a fiberglass, very sturdy to me, and a graphite, coudn't find any pics of it, only for the Fiberglass
    to ME, it looks cool
    I'm your huckleberry.

  16. #16
    RC Racer
    Join Date
    Sep 2009
    Location
    Bothell, WA
    Posts
    164
    Quote Originally Posted by DragonInside
    integy came with a LCG chassis, no its not those heavy pieces of aluminum, its something like the xtreme and has more slash feel than the xtreme chassis, to me, it looks strong and better, theres 2 versions, a fiberglass, very sturdy to me, and a graphite, coudn't find any pics of it, only for the Fiberglass
    to ME, it looks cool
    I saw both of those at R/C Planet and wondered how well it would preform. Has anyone actually used either of the two?
    Traxxas Slice
    Spektrum DX3e
    EZRun 60A@4000kV

  17. #17
    RC Racer
    Join Date
    Oct 2009
    Location
    Cali
    Posts
    119
    Not sure about the Integy chassis but I got mine almost together now..
    Need to make a plate for the esc and install the motor...
    Should be ready to go in a day or two and then to the track to learn how to drive it all over again....he he




  18. #18
    RC Champion
    Join Date
    Jul 2009
    Location
    Indianapolis, IN
    Posts
    1,040
    Very nice. Now you just need a brand new stock body to trick the competition into thinking it's stock.
    Slash VXL
    Summit VXL
    they have to share for now

  19. #19
    RC Competitor
    Join Date
    Mar 2009
    Location
    Rosarito, Mx
    Posts
    61
    hey colormegone, where did you buy the chassis, i wanna know!!!
    I'm your huckleberry.

  20. #20
    RC Racer
    Join Date
    Oct 2009
    Location
    Cali
    Posts
    119
    Thanks guys...
    I got the chassis from A Main Hobbies.
    I got most of it together and will get a pic tomorrow of it complete..
    Lots of work to get it right.

  21. #21
    RC Racer
    Join Date
    Sep 2009
    Location
    Bothell, WA
    Posts
    164
    Quote Originally Posted by colormegone
    Thanks guys...
    I got the chassis from A Main Hobbies.
    I got most of it together and will get a pic tomorrow of it complete..
    Lots of work to get it right.
    I'd like to see the pictures when you are done. Keep us posted on how it handles.
    Traxxas Slice
    Spektrum DX3e
    EZRun 60A@4000kV

  22. #22
    RC Racer
    Join Date
    Oct 2009
    Location
    Cali
    Posts
    119
    Here's a few pic's of it all finished and ready to race on Sat....>
    I have my Tekin 1/8 scale ESC, 5000 2cell 40c battery, and a few extra caps which are not needed with my 2 cell but they look cool....he he








  23. #23
    RC Champion
    Join Date
    Feb 2008
    Location
    sterling hts MICHIGAN!
    Posts
    2,037
    what re those resistors or what they are on the top for?
    if you want me to i can break your truck for free!

  24. #24
    RC Qualifier
    Join Date
    Oct 2009
    Location
    Jamul, CA
    Posts
    483
    Quote Originally Posted by thecoolman101
    what re those resistors or what they are on the top for?
    They are capacitors I think they supply more power when needed, ether to the ESC for more power, or to the radio to reduce cogging
    SLASH IS FIXED!!!!!!!!!!!!

  25. #25
    RC Racer
    Join Date
    May 2004
    Location
    Owensboro,Ky
    Posts
    242
    Man that thing ought to rip! I agree, with the 40c thunderpower the capacitors are over kill,but you should have plenty of power on demand.
    Loose Nuts Racing
    Skip Shartzer

  26. #26
    RC Racer
    Join Date
    Oct 2009
    Location
    Cali
    Posts
    119
    The whole set up came out of my drag funny car (using a 3c 5000 35C lipo), then the caps really help with full power loads for 1.5 seconds, 89 mph... Tekin RX8 and a 4.5 sensored motor...It goes REAL good in the slash....he he





  27. #27
    RC Racer
    Join Date
    Oct 2009
    Location
    Cali
    Posts
    119
    Well I have gone to two races with this chassis set up and was way off the first time out... Last night I had much better luck and had it tuned closer than ever... 7th out of 10 in the A Main so not so good on my part but it wasn't the trucks falt completely...he he
    I was running Goosebumps all the way around in the first practice and it came back with all the Nylon Traxxas 2.2 wheels cracked and broken...?
    I had some spares that were almost as bad and had a rear tire floppin off the rim by the time the last race was finished... The store at the track was out of wheels??? just my luck.
    Just order some JC 2.2 x 3 wheels and goosebumps to match and hope this stops my problems..
    If you want a racin chassis I highly recomend the Xtreme chassis.. They have a great product and great customer service.

    Lots of fun and a totally different truck now.
    I also was able to tame the 4.5 Tekin set up since the RX8 is so flexable to tune with.. 118 temps all night.. (16/90 gears).the alum trans case sure makes a differance too...............>
    I put RPM 2 stage pistons in the shocks and went with purple in the rear (60wt oil) and green in the front , with 50 wt. Much better than it has ever been.. These things are the ticket in my book.
    All RPM shock parts, Traxxas steering parts. 5000 TP 2s 40c lipo.








  28. #28
    RC Champion
    Join Date
    Jan 2010
    Location
    Green Bay, WI
    Posts
    2,269
    Bump for an awesome, pretty truck.
    PLEASE do not PM me and immediately go offline :p

  29. #29
    RC Racer
    Join Date
    May 2010
    Posts
    180
    way to dig up the dead lol.

  30. #30
    RC Champion
    Join Date
    Jul 2008
    Location
    Michigan
    Posts
    1,319
    haha nice lol
    Yes, I drive an electric converted Nitro Hawk.

  31. #31
    RC Turnbuckle Jr. El Sob's Avatar
    Join Date
    Feb 2010
    Location
    El Sobrante, Ca
    Posts
    9,884
    Are there any vids of this thing? How did it do at the track?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •