My mini erevo is so powerful it can flip 2 circles on the air. I use lipo and have some questions
should i reduce the pinion?
is there a cnc spur gear available?
GOT_VIDEO?Originally Posted by minime388
If you "reduce" the pinion (put a shorter pinion on) it's going to loose top speed but gain torque.Originally Posted by minime388
As far as a alloy spur i don't recommend it. You want to keep it plastic (spur) as the "weak link" in the drive train. You dont want to be blowing out diffs or drive shafts before the spur goes (although some have with the stock plastic spur)...
Keep flex'in those forum keyboard muscles.
hehe no i don't have video but it's true.
I think cnc delrin spur gear will be better?
Something will break as nitro said. You want the weakest link to be the cheapest and easiest part to replace. If you do put Alum. on it, you had better loosen up the slipper a little bit.
what are you running it on? 4s. if so go down to a 3s or just run your 2s in parallel
e-revo, ME-revo, micro-t, slash, DX3S