I just got my 2.4 Ghz radio today and for the life of me I can't seem to program the ESC to like it. I do what the manual says, press and hold the button until it goes green then red, then blink red once then let off ect... but it doesn't seem to work, what am I doing wrong?
I know it sounds dumb... but did you change the receiver in the vehicle?
Yes I did, and I plugged everything in right where it said to, it seems as if the ESC isn't giving me the option to program the radio, it just goes straight to the Race, Sport, and training mode thing
i know this sounds dumb but go back in the owners manual and read page 16 and follow each step to the "T"
See, I have done that a few times and it seems like the ESC might be faulty because it does not even go to the mode to program it.
awwwwwww mannn bummer blame it on taiwan!
RC RUNS IN MY BLOOD!
did you bind the reciever to the transmitter?
Is the esc in #2, and the servo in #1 channels in the receiver?
Jammin' Nitro Truggy 1/8
i know i had a problem like that and i was using a castle mm esc and there was a setting to extend the arming time and that fixed it so it would work with the esc and my spektrum....are others running 2.4 with stock esc without any issues?
ERevo Neu 1515/1y MMM5s
MiniRevo Neu 1110/1y MM3s
^^ this...Originally Posted by howitzer85
BTW, once you get it working you're going to love it... I finally put my revo on my xs3 (with an rs310 rx) and wow... night and day difference.. I can't believe I even for a moment considered leaving the car on the stock radio. no glitching, huge range, amazing braking and throttle control. it's a whole new car with a good radio.
Last edited by peelin_out; 07-23-2009 at 08:04 PM.
x2 on that I have a specktrum and it works great.
2 vxl slash's
vxl mini slash